Sökning: "Tungsten carbide"
Visar resultat 16 - 20 av 36 avhandlingar innehållade orden Tungsten carbide.
16. Sputtering and Characterization of Complex Multi-element Coatings
Sammanfattning : The thin film technology is of great importance in modern society and is a key technology in wide spread applications from electronics and solar cells to hard protective coatings on cutting tools and diffusion barriers in food packaging. This thesis deals with various aspects of thin film processing and the aim of the work is twofold; firstly, to obtain a fundamental understanding of the sputter deposition and the reactive sputter deposition processes, and secondly, to evaluate sputter deposition of specific material systems with low friction properties and to improve their performance. LÄS MER
17. Textured insert for improved heat extraction in combination with high-pressure cooling in turning of superalloys
Sammanfattning : Heat generated in a machining process is a common and critical obstacle faced in today's machining industries. The heat generated in the cutting zone has a direct negative influence on the tool life which, in turn contributes to increase the manufacturing costs. LÄS MER
18. Enhanced heat transfer and tool wear in high-pressure coolant assisted turning of alloy 718
Sammanfattning : Heat generated in a machining process is a common and critical obstacle faced in today's manufacturing industries. The heat generated in the cutting zone has adirect negative influence on the tool life, which, in turn contributes to increasing the manufacturing costs. LÄS MER
19. On failure modelling in finite element analysis : material imperfections and element erosion
Sammanfattning : This dissertation concerns failure modelling with material imperfections and element erosion in finite element analyses. The aim has been to improve the element erosion technique, which is simple to use and implement and also computationally inexpensive. LÄS MER
20. Erosion - Corrosion Resistance and Adhesion of Laser and Thermally Deposited Coatings in Fluidised Beds
Sammanfattning : High temperature erosion - corrosion is the major source for degradation of components such as heat exchangers, tubes, cyclones and water walls used in Fluidised Bed Combustion (FBC) plants. By coating the exposed components with a protective material, the degradation rate can be decreased. LÄS MER