Sökning: "material imperfections"

Visar resultat 1 - 5 av 44 avhandlingar innehållade orden material imperfections.

  1. 1. On failure modelling in finite element analysis : material imperfections and element erosion

    Författare :Mattias Unosson; Larsgunnar Nilsson; Kjell Simonsson; Lars Olovsson; Anders Eriksson; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; finite element method; element erosion; material failure; material imperfections; crack-tip; Solid mechanics; Fastkroppsmekanik;

    Sammanfattning : This dissertation concerns failure modelling with material imperfections and element erosion in finite element analyses. The aim has been to improve the element erosion technique, which is simple to use and implement and also computationally inexpensive. LÄS MER

  3. 2. Imperfections in Recycled Aluminium-Silicon Cast Alloys

    Författare :Anton Bjurenstedt; Anders Jarfors; Salem Seifeddine; Pål Schmidt; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Imperfections; Recycled cast Al-Si alloy; Fe-rich particles; Melt quality; Fractography; Differential scanning calorimetry.;

    Sammanfattning : In striving to produce high quality cast components from recycled aluminium alloys,imperfections have to be considered, because recycled aluminium usually containsmore of it. However, there are great energy savings to be made by using recycledaluminium; as little as 5% of the energy needed for primary aluminium productionmay be required. LÄS MER

  4. 3. On the influence of imperfections on microstructure and properties of recycled Al-Si casting alloys

    Författare :Anton Bjurenstedt; Salem Seifeddine; Anders E.W. Jarfors; Arne Dahle; Johan Moverare; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Imperfections; Recycled Al-Si alloys; Fe-rich intermetallics; Melt quality; Fractography; Defekter; Återvunna Al-Si legeringar; Fe-rika intermetaller; Smältakvalité; Fraktografi;

    Sammanfattning : There are great energy savings to be made by recycling aluminium; as little as 5% of the energy needed for primary aluminium production may be required. Striving to produce high quality aluminium castings requires knowledge of microstructural imperfections, which is extra important when casting recycled aluminium that generally contains higher levels of imperfections compared to primary aluminium. LÄS MER

  5. 4. Laser welding of boron steels for light-weight vehicle applications

    Författare :Karl Fahlström; Lars-Erik Svensson; Leif Karlsson; Jens Klaestrup Kristensen; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser welding; boron steel; high strength steels; strength reduction; brittle behavior; crack susceptibility; distortions; light-weight; quality; Manufacturing and materials engineering; Produktions- och materialteknik; Production Technology; Produktionsteknik;

    Sammanfattning : Laser beam welding has gained a significant interest during the last two decades. The suitability of the process for high volume production has the possibility to give a strong advantage compared to several other welding methods. However, it is important to have the process in full control since various quality issues may otherwise occur. LÄS MER

  7. 5. Multiscale Constitutive Modeling of Heterogeneous Engineering Materials

    Författare :Johan Jansson; Kent Salomonsson; Jakob Olofsson; Julian J. Rimoli; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : This work deals with different methods used to determine heterogeneous constitutive model parameters for macro-scale finite element models, based on microstructural variations, caused by the manufacturing process. These methods could be applied to decrease modeling errors associated with the material behavior, improving the predictive capabilities of structural analyses in simulation-driven industrial product development. LÄS MER