Sökning: "Metallography"

Visar resultat 11 - 13 av 13 avhandlingar innehållade ordet Metallography.

  1. 11. Deformation Behaviour, Microstructure and Texture Evolution of CP Ti Deformed at Elevated Temperatures

    Författare :Zhipeng Zeng; Stefan Jonsson; Hans J. Roven; Bevis Hutchinson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Commercially pure titanium; Zener–Hollomon parameter; Dynamic recovery; Dynamic recrystallization; Recrystallized volume fraction; Grain size; Flow stress; Constitutive equation; Texture; High angle grain boundary; Low angle grain boundary; Deformation twinning; Schmid factor; Misorientation; Hot compression; Slip system; Subgrain; EBSD; Construction materials; Konstruktionsmaterial;

    Sammanfattning : In the present work, deformation behavior, texture and microstructure evolution of commercially pure titanium (CP Ti) are investigated by electron backscattered diffraction (EBSD) after compression tests at elevated temperatures. By analysing work hardening rate vs. flow stress, the deformation behaviour can be divided into three groups, viz. LÄS MER

  3. 12. High temperature performance of materials for future power plants

    Författare :Junjing He; Pavel Korzhavyi; Rolf Sandström; Stefano Spigarelli; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Austenitic stainless steels; Nickel based superalloys; Low cycle fatigue; Creep-fatigue; Creep cavitation; Grain boundary sliding; Cavity nucleation; Cavity growth; Creep rupture strength; Advanced ultra-supercritical power plants.; Teknisk materialvetenskap; Materials Science and Engineering;

    Sammanfattning : Increasing energy demand leads to two crucial problems for the whole society. One is the economic cost and the other is the pollution of the environment, especially CO2 emissions. Despite efforts to adopt renewable energy sources, fossil fuels will continue to dominate. LÄS MER

  4. 13. Activated Recrystallization of Non-Sag Tungsten Wire

    Författare :Zonghe Lai; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : The objective of the present investigation was to explore the mechanism of activated recrystallization of heavily drawn doped (non-sag) tungsten wire material. The recrystallization can be induced at low temperatures by the presence of some metals, such as palladium, nickel, iron and others, on the wire surface, which is important as it can seriously deteriorate the mechanical properties of non-sag tungsten wires, when the wires serve as reinforcement material in metal matrix composites. LÄS MER