Sökning: "Heat resistance"

Visar resultat 16 - 20 av 278 avhandlingar innehållade orden Heat resistance.

  1. 16. Mass and Heat Transport in Dryer Fabrics - Experiments and Modelling

    Författare :Simon Smrtnik; Avdelningen för kemiteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; heat transport; dryer fabric design; fabric parameters; mass transport; condensation;

    Sammanfattning : A dryer fabric is used in the multi-cylinder dryer in order to improve the runnability of the web and to establish proper contact between the web and the hot cylinder, thus improving the heat transport. The dryer fabric separates the hot and moist paper from the ambient drying air and significantly influences the mass and heat transport. LÄS MER

  3. 17. Microstructural characterization of Haynes 282 after heat treatment and forging

    Författare :Ceena Joseph; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; carbides; gamma prime; Haynes 282; anisotropy ductility; microstructure; heat treatment;

    Sammanfattning : Over the past 75 years, solid-solution strengthened superalloys have been one among the most widely used materials for long term applications at elevated temperatures. The combination of properties such as high temperature strength, resistance to oxidation and corrosion, fabricability, and creep strength make them an unusual class of materials, attracting researchers and scientists to explore its full potential. LÄS MER

  4. 18. Microstructure Evaluation and Wear-Resistant Properties of Ti-alloyed Hypereutectic High Chromium Cast Iron

    Författare :Qiang Liu; Pär Jönsson; Keiji Nakajima; Niels Skat Tiedje; KTH; []
    Nyckelord :High Chromium Cast Iron; cooling rate; Ti addition; M7C3; TiC; carbides size distributions; volume fraction; heat treatment; microstructure; mechanical properties; wear resistance; statistics of extreme values SEV ; maximum carbides size.;

    Sammanfattning : High chromium cast iron (HCCI) is considered as one of the most useful wear resistance materials and their usage are widely spread in industry. The mechanical properties of HCCI mainly depend on type, size, number, morphology of hard carbides and the matrix structure (γ or α). LÄS MER

  5. 19. Engine Thermal Management in Heavy Duty Vehicles

    Författare :Arne Andersson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Control Simulation; Heat Exchangers; Heat Transfer; Thermal Management; Turbomachinery;

    Sammanfattning : Future regulations on noise and exhaust emissions have a large impact on heavy duty engine installations. Cooled EGR is used for NOx abatement. Better sealed engine encapsulations are used to meet new noise regulations. Engine thermal management is therefore becoming an increasingly important discipline. LÄS MER

  7. 20. The synthesis, surface modification and use of metal-oxide nanoparticles in polyethylene for ultra-low transmission-loss HVDC cable insulation materials

    Författare :Amir Masoud Pourrahimi; Ulf W. Gedde; Alexander Bismarck; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; polyethylene; metal-oxide nanoparticles; heat treatment; surface coating; humidity resistance; interfacial adhesion; nanocomposite; HVDC insulation; polyeten; metalloxid nanopartiklar; värmebehandling; ytmodifiering av partiklarna; fukt inverkan; gränsskiktsvidhäftning; nanokomposit; HVDC isolering; Fiber- och polymervetenskap; Fibre and Polymer Science;

    Sammanfattning : Polyethylene composites which contain low concentrations of metal-oxide nanoparticles e.g. ZnO and MgO are emerging materials for the use in insulations of extruded high-voltage direct-current (HVDC) cables. LÄS MER