Sökning: "Controller Area Network"
Visar resultat 6 - 10 av 26 avhandlingar innehållade orden Controller Area Network.
6. Concepts for Power System Small Signal Stability Analysis and Feedback Control Design Considering Synchrophasor Measurements
Sammanfattning : In the Nordic power network, the existence of poorly damped low-frequency inter-area oscillations (LFIOs) has long affected stability constraints, and thereby, limited power transfer capacity. Adequate damping of inter-area modes is, thus, necessary to secure system operation and ensure system reliability while increasing power transfers. LÄS MER
7. Power System Damping - Structural Aspects of Controlling Active Power
Sammanfattning : Environmental and economical aspects make it difficult to build new power lines and to reinforce existing ones. The continued growth in demand for electric power must therefore to a great extent be met by increased loading of available lines. LÄS MER
8. Distributed control of electric drives via Ehernet
Sammanfattning : This report presents the work carried out aiming towardsdistributed control of electric drives through a networkcommunication medium with temporal constraints, i.e, Ethernet.A general analysis on time delayed systems is carried out,using state space representation of systems in the discretetime domain. LÄS MER
9. Automotive Communication Security Methods and Recommendations for Securing In-vehicle and V2X Communications
Sammanfattning : Today’s vehicles contain approximately more than 100 interconnected computers (ECUs), several of which will be connected to the Internet or external devices and networks around the vehicle. In the near future vehicles will extensively communicate with their environment via Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I), together called V2X communications. LÄS MER
10. Synchrophasor Applications and their Vulnerability to Time Synchronization Impairment
Sammanfattning : Recent years have seen the significance of utilizing time-synchronized, high resolution measurements from phasor measurement units (PMUs) to develop and implement wide-area monitoring, protection and control (WAMPAC) systems. WAMPAC systems aim to provide holistic view of the power system and enable detection and control of certain power system phenomena to enhance reliability and integrity of the grid. LÄS MER