Sökning: "Industriell elektroteknik och automation"

Visar resultat 1 - 5 av 83 avhandlingar innehållade orden Industriell elektroteknik och automation.

  1. 1. DC-DC Converters - Dynamic Model Design and Experimental Verification

    Författare :Bengt Johansson; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; robotics; buck; dc-dc converter; modeling; audio susceptibility; current-mode control; load current; gain scheduling; current transformer; experimental verification; Electronics and Electrical technology; Automation; Elektronik och elektroteknik; Elektroteknik; Electrical engineering; reglerteknik; robotteknik; Automatiska system; control engineering;

    Sammanfattning : To obtain high performance control of a dc-dc converter, a good model of the converter is needed. The load usually affects the dynamics and one way to take this into consideration is to regard the load as a part of the converter. The load is often the most variable part of this system. LÄS MER

  2. 2. Dynamic Power System Load -Estimation of Parameters from Operational Data

    Författare :Ines Romero; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; control engineering; robotics; Automation; large disturbances; Load modeling; normal operation; voltage stability; dynamic load models; modeling and identification; normalization in reactive load models; Elektronik och elektroteknik; Electronics and Electrical technology; Automatiska system; robotteknik; reglerteknik; Electrical engineering; Elektroteknik;

    Sammanfattning : The significance of load modeling for voltage stability studies has been emphasized by several disturbances, which have taken place in the past years. They have shown that the loads in combination with other dynamics are among the main contributors of prolonged low voltage conditions, voltage instability and collapse in the power system. LÄS MER

  3. 3. Automation of Wheel-Loaders

    Författare :Siddharth Dadhich; Ulf Bodin; Fredrik Sandin; Ulf Andersson; Jerker Delsing; Juha Röning; Luleå tekniska universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Industrial Electronics; Industriell elektronik;

    Sammanfattning : Automation and tele-remote operation of mobile earth moving machines is desired for safety and productivity reasons. With tele-operation and automation, operators can avoid harsh ergonomic conditions and hazardous environments with poor air quality, and the productivity can in principle be improved by saving the time required to commute to and from work areas. LÄS MER

  4. 4. Borrowing the Bat's Ear for Automation - Ultrasonic Measurements in an Industrial Environment

    Författare :Gunnar Lindstedt; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Automatiska system; control engineering; robotics; Automation; electrostatic transducer; piezoelectric transducer; echolocation; bat; automation; localization; recognition; geometry; distance; measurement; ultrasound; robotteknik; reglerteknik;

    Sammanfattning : This work focuses on measurement principles based on ultrasound for applications in industrial automation. The measurements made are of geometric nature. The methods used are when possible based on experience and/or inspiration from the study of bats. LÄS MER

  5. 5. Robotic Friction Stir Welding for Flexible Production

    Författare :Jeroen De Backer; Gunnar Bolmsjö; Giorgos Nikoleris; Anders Robertsson; Högskolan Väst; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; Friction Stir Welding; Automation; Robotics; Aluminium; Lightweight design; Industriell arbetsvetenskap; Industrial engineering; Mechatronics; Mekatronik;

    Sammanfattning : Friction Stir Welding (FSW) is a modern welding process that joins materials by frictional heat, generated by a rotating tool. Unlike other welding processes, the material never melts, which is beneficial for the weld properties. LÄS MER