Sökning: "undercooling"
Visar resultat 6 - 10 av 10 avhandlingar innehållade ordet undercooling.
6. A critical survey of the grain refining mechanisms of aluminium
Sammanfattning : In the present work, several possible interpretations of the grain refining mechanisms of aluminium castings after additions of titanium and boron are compared with the results of critical test experiments. The presence of B does not seem to affect the binary Al-Ti phase diagram close to the A1 comer, except for formation of boride phase. LÄS MER
7. Nanoplasmonic Sensing for Materials Science
Sammanfattning : With the rising importance of nanoscience and nanotechnology, there is a need for new sensitive and easy-to-use characterization techniques able to follow processes at the nanoscale. In this thesis different aspects of nanoplasmonic sensing for studying materials science processes at the nanoscale are demonstrated and discussed for the following model systems: oxidation/corrosion of Al and Cu and the solid-liquid phase transition of Sn. LÄS MER
8. Computational Materials Design of Medium Mn Steels
Sammanfattning : Medium Mn steels (~ 3–10 mass % Mn), a new category of advanced high strength steels, attracted worldwide research interests recent years due to their excellent mechanical properties and low cost. These steels have fine microstructures and contain large fraction of metastable retained austenite (~ 30 volume %), therefore exhibit excellent strength and elongation. LÄS MER
9. Microstructural development in laser-based powder bed fusion - from ferritic stainless steel to medium entropy alloys
Sammanfattning : Ever since the advent of additive manufacturing (AM), the interest in AM technologies has skyrocketed due to its intrinsic ability to produce near net shaped components. Laser-based powder bed fusion (LB-PBF), being one of the most widely adapted AM technologies, has been especially a game changer due to its ability to produce components of complex geometries with improved designs and to reduce not only the final weight of the products but also the amount of the waste produced. LÄS MER
10. Influence of Material Variations on Machinability - Machining Difficult-to-Machine Alloys
Sammanfattning : The aim of this study is to investigate the effect of work material variations on machinability. Improved knowledge in this respect supports the development of sustainable production both from resource and economical points of view.The properties of work materials vary greatly depending on how they were manufactured. LÄS MER