Sökning: "Metal Oxidation and Corrosion"
Visar resultat 1 - 5 av 59 avhandlingar innehållade orden Metal Oxidation and Corrosion.
1. High-temperature corrosion properties of chromia- and alumina-forming alloys
Sammanfattning : Electricity production, transportation, and manufacturing industry are some of the largest sources of greenhouse gas emissions. In many cases, these processes are carried out at high temperature and energy efficiency is limited by material degradation, so-called ‘high-temperature corrosion’. LÄS MER
2. High Temperature Corrosion Behaviour of Ni-base Alloys and FeCrAl Alloys – The Influence of Water Vapour
Sammanfattning : Electricity production, transportation, and manufacturing industry are some of the largest sources of greenhouse gas emissions. In many cases, these processes are carried out at high temperature and energy efficiency is limited by material degradation, so-called ‘high-temperature corrosion’. LÄS MER
3. Kinetic Measurements Using Nanoplasmonic Sensing
Sammanfattning : In this thesis the nanoplasmonic sensing technique was used to study kinetics of (i) the oxidation of Al nanoparticles in air and water and (ii) the solid-liquid phase transition in Sn nanoparticles. The nanoplasmonic sensing technique detects changes of the localized surface plasmon resonance (LSPR) in metal nanoparticles. LÄS MER
4. Degradation Mechanisms of Heat Resistant Steel at Elevated Temperatures : In an Iron Ore Pelletizing Industry
Sammanfattning : This thesis focuses on the different degradation mechanisms of the stainless steel in a travelling grate in a Grate-Kiln iron ore pellet indurator. The travelling grate is a conveyor belt that transports green-body pellets to a rotary kiln while the pellets are being dried and pre-heated to a temperature of 900-1100 °C by recycled hot air. LÄS MER
5. Magnetron Sputtering of Nanocomposite Carbide Coatings for Electrical Contacts
Sammanfattning : Today’s electronic society relies on the functionality of electrical contacts. To achieve good contact properties, surface coatings are normally applied. Such coatings should ideally fulfill a combination of different properties, like high electrical conductivity, high corrosion resistance, high wear resistance and low cost. LÄS MER