Avancerad sökning
Visar resultat 1 - 5 av 23 avhandlingar som matchar ovanstående sökkriterier.
1. Interfacial Phenomena in Two-Phase systems: Emulsions and slag Foaming
Sammanfattning : In the present work studies were performed to provide understanding for further model development of the two-phase phenomena, film formation from o/w emulsions and slag foaming.The drying of o/w emulsions of different oil viscosities on hydrophobic and hydrophilic substrates was studied. LÄS MER
2. Refractory corrosion in biomass gasification
Sammanfattning : To stop the net emission of CO2 to the atmosphere, we need to reduce our dependency of fossil fuels. Although a switch to a bio-based feedstock hardly can replace the total amount of fossils used today, utilization of biomass does still have a role in a future in combination with other techniques. LÄS MER
3. Fine particle emissions and slag formation in fixed-bed biomass combustion : aspects of fuel engineering
Sammanfattning : There is a consensus worldwide that the share of renewable energy sources should be increased to mitigate climate change. The strive to increase the renewable energy fraction can partly be met by an increased utilization of different biomass feedstocks. LÄS MER
4. Mineral Reactions and Slag Formation During Reduction of Olivine Blast Furnace Pellets
Sammanfattning : The present work focuses on mineral reactions and slag formation of LKAB olivine iron ore pellets (MPBO) subjected to reducing conditions in the LKAB experimental blast furnace (EBF). The emphasis is on olivine reactions with surrounding iron oxides. Many factors influence the olivine behaviour. LÄS MER
5. Aspects of Ash Transformations in Pressurised Entrained-Flow Gasification of Woody Biomass : Pilot-scale studies
Sammanfattning : Pressurised entrained-flow gasification (PEFG) of woody biomass has the potential to produce high purity syngas for the production of vital chemicals, e.g., biofuels. However, ash-related issues such as reactor blockages and refractory corrosion need to be addressed before this potential can be realised from a technical perspective. LÄS MER