Avancerad sökning

Visar resultat 1 - 5 av 61 avhandlingar som matchar ovanstående sökkriterier.

  1. 1. Characterization of Electrodeposited Fe-based Metallic Coatings: Toward a Sustainable Approach

    Författare :Antonio Mulone; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Electrodeposition; structural characterization; coatings; electrodeposited tin; iron alloys;

    Sammanfattning : Electrodeposition has rapidly grown in the last 50 years and it has been applied to deposit metals and alloys with complex shapes or to produce fully dense nanostructures and amorphous coatings. Thanks to the achieved improved properties of the electrodeposited materials, electrodeposition has been applied in a wide set of applications including protective coatings, and magnetic and electronic applications. LÄS MER

  3. 2. Adhesion and erosion-corrosion of protective coatings

    Författare :Anders Hjörnhede; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : .... LÄS MER

  4. 3. Microstructure and oxidation behavior of High Velocity Oxy-Fuel spray deposited Ti2AlC coatings

    Författare :Marie Sonestedt; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; coatings; High Velocity Oxy-Fuel HVOF ; Ti2AlC; oxidation; microstructure; SEM; TEM;

    Sammanfattning : Ti2AlC is one of the ternary carbides in the MAX phase group of materials. This group of materials have a unique combination of ceramic and metallic properties, such as machinability, high thermal conductivity, low density and oxidation resistance. LÄS MER

  5. 4. Cutting Edge Titanium-based CVD Hard Coatings

    Författare :Linus von Fieandt; Mats Boman; Ulf Jansson; Erik Lindahl; Tommy Larsson; Henrik Pedersen; Uppsala universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; CVD; Hard coatings; Ti C; N ; TiN;

    Sammanfattning : Modern tools for metal cutting applications, such as turning or milling, are typically improved with a thin protective coating. Despite being only a few microns thick, the coating can increase the lifetime of the tool by more than 100 times compared to an uncoated tool. Two different types of techniques are normally used to deposit the coatings, i. LÄS MER

  7. 5. Low Cycle Fatigue and Thermo-Mechanical Fatigue of Uncoated and Coated Nickel-Base Superalloys

    Författare :Svjetlana Stekovic; Torsten Ericsson; Hael Mughrabi; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; AMDRY997; CMSX-4; SCB; Thermo-Mechanical Fatigue; Coatings; Gas Turbine; IC1; IC3; IN792; Low Cycle Fatigue; Nickel-Base Superalloys; RT22; Materials science; Teknisk materialvetenskap;

    Sammanfattning : High strength nickel-base superalloys have been used in turbine blades for many years because of their superior performance at high temperatures. In such environments superalloys have limited oxidation and corrosion resistance and to solve this problem, protective coatings are deposited on the surface. LÄS MER