Sökning: "pollutant transport"

Visar resultat 31 - 35 av 52 avhandlingar innehållade orden pollutant transport.

1. 31. Biofiltration of odorous gas emissions

   Författare :Anneli Andersson-Chan; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VA-teknik; Urban Water Engineering;

   Sammanfattning : Biofiltration has shown its potential as an interesting treatment alternative for contaminated gas streams. Unlike conventional technologies, such as adsorption, scrubbers, and incineration, biofiltration offers effective pollution control at relatively low capital and operating costs, and without the generation of secondary pollution that may require subsequent treatment. LÄS MER

3. 32. Basin-scale change in water availability and water quality under intensified irrigated agriculture

   Författare :Rebecka Törnqvist; Jerker Jarsjö; Marcel van der Perk; Stockholms universitet; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Irrigation; Hydrology; Land-use change; Basin-scale; Central Asia; Aral Sea; Semi-arid; Return flow; Water saving; Health risk; Water quality; Surface water; Groundwater; Nitrogen; Attenuation; Recirculation; Climate change; Physical Geography; naturgeografi;

   Sammanfattning : Changes in land use and water use can greatly impact the cycling of water and water-borne substances. Increased redistribution of river water to irrigated fields can cause enhanced evapotranspiration and decreased river discharge. LÄS MER

4. 33. Urban Surfaces as Sources of Stormwater Pollution : An Evaluation of Substances Released from Building Envelopes

   Författare :Alexandra Müller; Maria Viklander; Helene Österlund; Jiri Marsalek; Per-Arne Malmqvist; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VA-teknik; Urban Water Engineering; Centre - Centre for Stormwater Management DRIZZLE ; Centrumbildning - Centrum för dagvattenhantering DRIZZLE ;

   Sammanfattning : Stormwater is an important transport pathway for pollutants from the urban environment into receiving water bodies, and, thus, it contributes to the deterioration of urban surface waters. The aim of this Licentiate thesis was to advance the understanding of the contributions of urban stormwater pollutants from building surface materials, and evaluate the implications for stormwater quality. LÄS MER

5. 34. The Influence of Multiple Injections on Combustion : an Experimental Investigation

   Författare :Rickard Ehleskog; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; multiple injections; direct injected DI diesel engines; diesel sprays; emissions; Internal combustion engines; diesel combustion;

   Sammanfattning : The high fuel efficiency and torque of the diesel engine has made it the obvious choice for heavy duty applications for a long time. In addition, these characteristics of the modern super-charged HSDI diesel engine also make it very suitable and popular for car applications. LÄS MER

7. 35. Materials Design for the Improvement of SiC Field Effect Gas Sensor performance in High Temperature Process Control applications

   Författare :Lida Khajavizadeh; Mike Andersson; Fredrik Eriksson; Krisztian Kordas; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : Following growing concerns about the effect these last decades of accelerating energy consumption, escalating use of natural (not the least fossil) resources, and waste generation has had on earth’s climate, human health, and the environment, industry is facing mounting pressure to increase the energy-, resource-, and cost-efficiency of both processes and products while drastically reducing pollutant emissions. In response, industry is, besides increasing their utilization of renewable energy and introducing new bio-based products, taking advantage of the rapid development in 5G technology and associated wireless interconnectivity to move towards full automation of production processes and facilities. LÄS MER