Sökning: "low sliding speed"
Visar resultat 16 - 20 av 23 avhandlingar innehållade orden low sliding speed.
16. Rough surfaces in contact : artificial intelligence and boundary lubrication
Sammanfattning : Interacting surfaces are found in mechanical systems and components. Since engineered surfaces are not perfectly smooth, only a fraction of the nominal surface area is actually in contact. This fraction is denoted as the real area of contact, Ar, and is formed by the sum of the contact spots between the two touching surfaces. LÄS MER
17. Frictional studies and high strain rate testing of wood under refining conditions
Sammanfattning : When producing thermomechanical pulps (TMP), wood chips and fiber material are loaded mechanically in a disc-refiner to separate the fibers and to make them flexible. In the process, much of the energy supplied is transferred to the fiber material through cyclic compression, shear and friction processes. LÄS MER
18. Procedure for the reduction of the effect of transient whole body vibrations
Sammanfattning : There is a growing interest in the topic areas of increased vibration comfort and reduced vibration levels in work vehicles. Legislation, health costs and demands for increased competitiveness are all important motivating factors in this growing interest. LÄS MER
19. Wear behavior of Ti1-xAlxN-based coatings during turning
Sammanfattning : Ti1-xAlxN coatings are extensively used on cutting tools used for metal cutting. In this thesis, the wear behavior of TiN, TiAlN with different Al-content, and TiAlWN and TiAlMoN coatings is investigated after turning, using electron microscopy and X-ray absorption spectroscopy techniques. LÄS MER
20. Faults detection and diagnosis for three phase induction machines
Sammanfattning : Three phase induction motors have been intensively utilized in industrial applications, mainly due to their efficiency and reliability. These motors have good properties such as: increased stability and robustness, durability, large power to weight ratio, low production costs and controllability easiness. LÄS MER