Sökning: "heat losses"

Visar resultat 11 - 15 av 197 avhandlingar innehållade orden heat losses.

1. 11. Hydrodynamics and Heat Transfer in Vertical Falling Films with Smooth and Modified Heat-Transfer Surfaces – An Experimental and Numerical Investigation

   Författare :Anders Åkesjö; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; film thickness; local heat transfer coefficient; numerical simulations; heat transfer; falling film; VOF; evaporation.;

   Sammanfattning : High energy utilization efficiency is important to achieve a sustainable society. By having highly efficient heat exchangers, more energy can be recovered and reused at a lower cost. LÄS MER

3. 12. District heating pipes : heat losses and environmental impacts

   Författare :Camilla Holmgren; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : .... LÄS MER

4. 13. Numerical and Experimental Investigations of Design Parameters Defining Gas Turbine Nozzle Guide Vane Endwall Heat Transfer

   Författare :Frank G. Rubensdörffer; Torsten Fransson; Albin Bölcs; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Turbomachinery; secondary flow; endwall heat transfer; linear cascade test facility; CFD; RANS; V2F turbulence model; combustion chamber nozzle guide vane interface; heat shield; cavity; cooling air; Mechanical energy engineering; Mekanisk energiteknik;

   Sammanfattning : The primary requirements for a modern industrial gas turbine consist of a continuous trend of an increasing efficiency combined with very low emissions in a robust, cost-effective manner. To fulfil these tasks a high turbine inlet temperature together with advanced dry low NOX combustion chambers are employed. LÄS MER

5. 14. Experimental Study on Truck Related Power Losses: The Churning Losses in a Transmission Model and Active Flow Control at an A-pillar of Generic Truck Cabin Model

   Författare :Erwin Adi Hartono; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hot wire anemometry; Machine learning; Computational Fluid Dynamics; A-Pillar; Transmission; Flow separation; Churning losses; CFD; Gearbox; Torque measurement; Particle Image Velocimetry; Smoothed Particle Hydrodynamics.; Active Flow Control; SPH; Curve fit; Synthetic Jets; Load independent power losses; Aeration; Flow visu- alization;

   Sammanfattning : The fight with global warming constantly forces vehicle manufacturers to innovate, in order to be able to reduce the CO2 emissions of their product. This means that marginal efficiency gains in every component are considered beneficial for total reduction of CO2 emissions. LÄS MER

7. 15. Numerical Analysis of Heat Transfer and Fluid Flow in Heat Exchangers with Emphasis on Pin Fin Technology

   Författare :Hamid Nabati; Jafar Mahmoudi; Dan Loyd; Mälardalens högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CFD; Heat exchanger; Pin fin technology; Cooling system; Power transformers; CO2; Energy- and Environmental Engineering; energi- och miljöteknik;

   Sammanfattning : One of the most important industrial processes is heat transfer, carried out by heat exchangers in single and multiphase flow applications. Despite the existence of well-developed theoretical models for different heat transfer mechanisms, the expanding need for industrial applications requiring the design and optimization of heat exchangers, has created a solid demand for experimental work and effort. LÄS MER