Sökning: "heat shield"
Visar resultat 1 - 5 av 9 avhandlingar innehållade orden heat shield.
1. Numerical and Experimental Investigations of Design Parameters Defining Gas Turbine Nozzle Guide Vane Endwall Heat Transfer
Sammanfattning : The primary requirements for a modern industrial gas turbine consist of a continuous trend of an increasing efficiency combined with very low emissions in a robust, cost-effective manner. To fulfil these tasks a high turbine inlet temperature together with advanced dry low NOX combustion chambers are employed. LÄS MER
2. On-Engine Turbocharger Performance Considering Heat Transfer
Sammanfattning : Heat transfer plays an important role in affecting an on-engine turbocharger performance. However, it is normally not taken into account for turbocharged engine simulations. LÄS MER
3. Determination of the thermal conductivity of the insulation in district heating mains : Field measurements
Sammanfattning : This thesis concerns the development of a measurement method for determination in the field of the thermal conductivity of the insulation in buried district heating mains. The thermal conductivity of the insulation is calculated from the measured value of the radial heat flow through the heating main, the measured temperature difference across the insulation, and the dimensions of the heating main. LÄS MER
4. Melt flow and surface stability effects on polymer flammability : A study on polystyrene, flexible polyurethane foam and polyolefin composites
Sammanfattning : Our ability to accurately determine the flammability properties of polymers is hampered bythe erratic effects of deformation and liquid flow that occur during polymer combustion.This study aims to improve the understanding of such effects at several levels: The often obvious impact of melt flow on standardized flammability test methods forelectrical appliances is described to identify the need and to motivate others to worktowards an improved material characterization. LÄS MER
5. Additive Manufacturing using Alloy 718 Powder : Influence of Laser Metal Deposition Process Parameters on Microstructural Characteristics
Sammanfattning : Additive manufacturing (AM) is a general name used for production methodswhich have the capabilities of producing components directly from 3D computeraided design (CAD) data by adding material layer-by-layer until a final component is achieved. Included here are powder bed technologies, laminated object manufacturing and deposition technologies. LÄS MER