Sökning: "Torque Ripple"

Visar resultat 1 - 5 av 13 avhandlingar innehållade orden Torque Ripple.

  1. 1. Synchronous Reluctance Machine (SynRM) in Variable Speed Drives (VSD) Applications

    Författare :Reza Rajabi Moghaddam; Chandur Sadarangani; Alfredo Vagati; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Synchronous Reluctance Machine SynRM ; Torque; Torque Ripple; Design; Optimization; FEM; Control; Standard Size; Measurement; Performance Comparison; Induction Machine IM ; Interior Permanent Magnet Machine IPM ; Variable Speed Drive VSD ; General Purpose GP ; Field Oriented Control FOC ; Direct Torque Control DTC ; Heat Run; Test; Thermal; Operation Diagram; Circle Diagram; Electrical engineering; Elektroteknik;

    Sammanfattning : This thesis is comprehensively dedicated to the theoretical and experimental reevaluation of the Synchronous Reluctance Machine (SynRM). A simple approach to derive the SynRM main characteristics and behavior is followed. An introduction to an evaluation of the different control strategies in is given. LÄS MER

  3. 2. Run-Up Transient Analysis for Salient Pole Wound Field Synchronous Motors : Field winding and power electronics implications for a smoother and cooler asynchronous start

    Författare :Roberto Felicetti; Urban Lundin; Andreas Binder; Uppsala universitet; []
    Nyckelord :apparent resistance; cable modeling; current control; transmission line model; eddy currents; field winding; frequency analysis response; Fourier Transform; impedance mismatch; main inductance; overvoltage; parasitic capacitance; partial discharge; quality factor; ringing; slew rate; stray inductance; voltage gradient; winding resonance frequency; asynchronous start; run-up; torque ripple; reluctance torque; Engineering Science with specialization in Science of Electricity; Teknisk fysik med inriktning mot elektricitetslära;

    Sammanfattning : Salient Pole Wound Field Synchronous Machines have better efficiency at full load than asynchronous machines of the same capability. Moreover, where asynchronous machines need inherently to draw a magnetizing current from the grid, Salient Pole Wound Field Synchronous Machines can work efficiently at unity power factor. LÄS MER

  4. 3. Electromagnetic Analysis of Hydroelectric Generators

    Författare :Martin Ranlöf; Urban Lundin; Georg Traxler-Samek; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Contra-rotating rotors; damping torque; damper winding; finite element method; hydroelectric generators; permeance model; pole shoe shape; rotational losses; single machine infinite bus; slot ripple; synchronizing torque; synchronous machines; voltage waveform.; Engineering physics; Teknisk fysik; Engineering Science with specialization in Science of Electricity; Teknisk fysik med inriktning mot elektricitetslära;

    Sammanfattning : Hydropower maintains its position as the most important source of renewable electric energy in the world. The efficiency of large hydropower plants is unsurpassed, and after more than hundred years of development, the technology is mature and highly reliable. LÄS MER

  5. 4. Blade force measurements and electrical torque ripple of a vertical axis wind turbine

    Författare :Morgan Rossander; Sandra Eriksson; Hans Bernhoff; Magnus Rahm; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Teknisk fysik med inriktning mot elektricitetslära; Engineering Science with specialization in Science of Electricity;

    Sammanfattning : Wind power has become an attractive alternative for clean energy production. Horizontal axis turbines are increasing in power rating and are maturing as products. The cost of maintenance, noise levels and durability are possible concerns of the modern horizontal axis wind turbines. LÄS MER

  7. 5. On the Design of Electric Traction Machines : Design and Analysis of an Interior Permanent Magnet Synchronous Machine for Heavy Commercial Vehicles

    Författare :Rasmus Andersson; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Design of electrical machines; IPMSM; Electric propulsion; Thermal model; Skewing; Torque ripple analysis; Mechanical losses; Iron losses; Loss analysis; Heavy commercial vehicles;

    Sammanfattning : Recent years have proven the benefits of electrifying the road bound vehicle fleet. With new components entering, the general understanding as well as the components as such needs to be improved. LÄS MER