Sökning: "Thermal fatigue"

Visar resultat 16 - 20 av 124 avhandlingar innehållade orden Thermal fatigue.

  1. 16. Influence of combined thermal and mechanical loadings on pearlitic steel microstructure in railway wheels and rails

    Författare :Dimitrios Nikas; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Low cycle fatigue LCF ; Wheel steels; Hardness; TEM; Thermal effects; EBSD; Rail steels; Pearlite; Multiaxial fatigue; Spheroidisation; Materials Science;

    Sammanfattning : One of the most important aspects in railway operation is the interaction between rail and wheel. The contact patch between these two components is around the size of a small coin, and since high loads act on this small area, stresses will give rise to wear and damage in both components. LÄS MER

  3. 17. Fatigue of Asphalt Mixes - Theory of Viscoelasticity and Continuum Damage Mechanics Applied to Uniaxial Fatigue Data from Laboratory Tests

    Författare :Richard Nilsson; Trafik och väg; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; asphalt mixture; viscoelastic; Fatigue; deterioration models; Continuum Damage Mechanics; laboratory test; uniaxial; hydraulic engineering; Civil engineering; offshore technology; soil mechanics; Väg- och vattenbyggnadsteknik;

    Sammanfattning : The advance of analytic (mechanistic) design methods increases the need for fundamental material properties. Fatigue cracking due to traffic loading, in combination with permanent deformation (rutting), thermal cracking, irregularities, frost heave and reflective cracking are some of the major criteria used when designing an asphalt concrete pavement. LÄS MER

  4. 18. A ΔJ approach for nonlinear fatigue crack propagation : Experimental and numerical investigation of a ductile superalloy

    Författare :Daniel Nilsson; Per Almroth; Kjell Simonsson; Björn Sjödin; Daniel Leidermark; Sören Sjöström; Fredrik Borén; Johan Ahlström; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ΔJ; Cyclic J-integral; Fatigue testing; Nickel-based superalloy; Thermo-mechanical fatigue; Elasto-plastic fracture mechanics;

    Sammanfattning : This dissertation is a product of an academic-industrial collaboration between the Division of Solid Mechanics at Linköping University and Siemens Energy AB. The focus is on enhancing the design optimisation procedures for high-temperature components in industrial gas turbines (IGT). LÄS MER

  5. 19. Residual Stress Analysis and Fatigue Assessment of Welded Steel Structures

    Författare :Zuheir Barsoum; Jack Samuelsson; Dan Zenkert; Stephen Maddox; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fatigue failure; welding; weld defects; welded joints; stress concentration; residual stress; linear elastic fracture mechanics; welding simulation; finite element analysis; fatigue crack growth.; Engineering mechanics; Teknisk mekanik;

    Sammanfattning : This doctoral thesis is concerned with fatigue life of welded structures. Several topics related to fatigue of welded structures are treated such as; weld defects and their influence on fatigue performance of welded structures, fatigue life prediction using LEFM (Linear Elastic Fracture Mechanics), fatigue testing, welding simulation, residual stress prediction and measurement and their influence on fatigue life. LÄS MER

  7. 20. Creep Behaviour of Titanium Aluminides and its Relation to Phase Distributions and Dislocation Structures

    Författare :Dennis Lundström; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; gamma-TiAl; twinning; fatigue; dislocations; microstructure; thermal transport properties; creep;

    Sammanfattning : The need for more efficient gas turbines with lowered fuel consumption and thereby lowered emission has recently lead to increased interest in low-density, .gamma.-based TiAl intermetallic alloys as a replacement of e.g. LÄS MER