Avancerad sökning
Visar resultat 1 - 5 av 18 avhandlingar som matchar ovanstående sökkriterier.
1. On the hot crack formation during solidification of iron-base alloys
Sammanfattning : Hot cracking during solidification is a severe problem inmany casting processes, for example in continuous casting.Combinations of low strength and low ductility of the materialat high temperatures and applied tensile stress can cause hotcracking. LÄS MER
2. Weldability of Precipitation Hardening Superalloys – Influence of Microstructure
Sammanfattning : Superalloys and in particular the precipitation hardened Ni-based superalloys havealways been used extensively in the hot sections of jet engines. Large hot structuralengine components with complex geometry have preferably been cast as single piececomponents since the large scale vacuum investment casting process becameavailable about fifty years ago. LÄS MER
3. Weld Cracking of Precipitation Hardening Ni-based Superalloys - Investigation of repair welding characteristics and susceptibility towards strain age cracking
Sammanfattning : High temperature resistance and strength requirements make nickel-based superalloys the material of choice for the hot section of aero engines. Fabrication in terms of combining wrought and cast parts in the manufacturing of hot structural components enables component optimisation via the use of wrought high-strength parts, where geometrical constraints allow, and cast parts to produce complex geometries. LÄS MER
4. Weld Cracking in Precipitation Hardening Ni-based Superalloys
Sammanfattning : Manufacturing of hot structural components for aero engines requires the materials being used to be weldable. The high demands on strength and temperature resistance make nickel based superalloys the material of choice for this application. LÄS MER
5. Mechanical Properties, Microstructures and Defects of Tool Steels Fabricated by Additive Manufacturing
Sammanfattning : Additive Manufacturing (AM) has been gaining significant interest in the manufacturing of metallic materials in the recent years. From a techno-commercial standpoint, tooling is one of the areas with low production volumes but very high demands on part performance and complexity in design, all of which are characteristic for metal AM. LÄS MER