Sökning: "Mikael olsson"

Visar resultat 11 - 15 av 42 avhandlingar innehållade orden Mikael olsson.

1. 11. On the Nature of Cemented Carbide Wear in Rock Drilling

   Författare :Ulrik Beste; Staffan Jacobson; Mikael Olsson; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; cemented carbide; wear; rock drilling; rock; Materialvetenskap; Materials science; Teknisk materialvetenskap;

   Sammanfattning : WC/Co cemented carbide is a composite material for highly demanding wear applications. The unique combination of hardness (from the WC-phase) and toughness (from the binder Co) gives a material especially suitable for rock drilling. LÄS MER

3. 12. Surface Characterisation Using ToF-SIMS, AES and XPS of Silane Films and Organic Coatings Deposited on Metal Substrates

   Författare :Ulf Bexell; Mikael Olsson; Sven Erik Hörnström; Åsa Kassman Rudolphi; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; Silanes; Organic films; ToF-SIMS; AES; XPS; Materialvetenskap; Materials science; Teknisk materialvetenskap; materialvetenskap; Materials Science;

   Sammanfattning : This work focuses on the surface and interfacial characterisation of silane films of a non-organofunctional silane, 1,2-bis(triethoxysilyl)ethane (BTSE), and an organofunctional silane, γ-mercaptopropyltrimethoxysilane (γ-MPS), deposited on Al, Zn and Al-43.4Zn-1.6Si (AlZn) alloy coated steel. LÄS MER

4. 13. Modelling and strength grading of structural timber and glulam lamellae on the basis of optical scanning and dynamic excitation

   Författare :Andreas Briggert; Anders Olsson; Jan Oscarsson; Mikael Perstorper; Linnéuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fibre direction; finger joint; machine strength grading; knots; tracheid effect; Norway spruce; Byggteknik; Civil engineering;

   Sammanfattning : Machine strength grading of sawn timber is a sawmill process in which density, modulus of elasticity (MOE) and bending or tensile strength are predicted such that the timber can be assigned to strength classes. The predictions of these properties are performed using one or several so-called indicating properties (IPs), which represent a board property, or combination of board properties, measured non-destructively. LÄS MER

5. 14. Surface Engineering in Sheet Metal Forming

   Författare :Per Carlsson; Mikael Olsson; Niklas Axén; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; Friction; wear; metal coated steel sheet; dry lubricants; galling; PVD coatings; Materialvetenskap; Materials science; Teknisk materialvetenskap; materialvetenskap; Materials Science;

   Sammanfattning : In recent years, surface engineering techniques have been developed in order to improve the tribological performance in many industrial applications. In sheet metal forming processes, the usage of liquid lubricants can be decreased by using self lubricated tribo surfaces which will result in more environmentally friendly workshops. LÄS MER

7. 15. Galling of high strength steels and stainless steels in sheet metal forming as evaluated using pin-on-disc testing

   Författare :Jenny Eriksson; Mikael Olsson; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Galling; sheet metal forming; high strength steels; stainless steels; Teknisk fysik med inriktning mot tribomaterial; Engineering Science with specialization in Tribo Materials;

   Sammanfattning : The thesis focuses on the problem galling in sheet metal forming operations. Galling occurs when sheet metal transfers from the sheet surface onto the tool surface and causes surface damages to following sheets in the forming operation. When this happens the tool must be replaced causing production stops and additional expenses. LÄS MER