Sökning: "spray formation"

Visar resultat 31 - 35 av 107 avhandlingar innehållade orden spray formation.

1. 31. The effects of long chain alcohol blends on engine performance and spray characteristics in CI engines

   Författare :Josefine Preuss; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; spray characteristics; RME; drop-in bränslen; long chain alcohols; CI engine; HVO;

   Sammanfattning : Replacing fossil fuels with alternatives derived from renewable sources is one way of meeting society’s increasing need for mobility while also significantly reducing greenhouse gas emissions from vehicles with internal combustion engines. To facilitate such a replacement, this thesis presents optical spray studies and engine experiments conducted to evaluate the potential of blends of biomass-derived alcohols and vegetable oils to serve as drop-in fuels for compression ignition engines. LÄS MER

3. 32. Simulation of Combustion and Mixture Formation for Gasoline Direct Injection Engine Application

   Författare :Chen Huang; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VSB2; Reitz-KHRT; gasoline surrogate; LISA; sensitivity study.; Reitz-Diwakar; Trajectory collision; laminar flame speed; chemical kinetics; TAB; Rosin-Rammler; ignition delay; OpenFOAM; ethanol; O Rourke collision; SMD; hollow cone spray; liquid penetration;

   Sammanfattning : The development and introduction of new engine technologies are primarily motivated by the need to comply with increasingly stringent emissions legislation and to reduce fuel consumption. One of the most important of these new engine technologies is direct gasoline injection, which is considered to be an important and cost-effective measure to meet both targets. LÄS MER

4. 33. Some physical and chemical aspects of soot formation and oxidation in spray combustion modeling

   Författare :Feng Tao; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : .... LÄS MER

5. 34. The rotating injector as a tool for exploring DI diesel combustion and emissions formation processes

   Författare :Magnus Sjöberg; KTH; []
   Nyckelord :diesel spray combusion; rotating injector. Air swirl; air fuel-mixing. Soot. NO. CO; flame visualization. Chemking modeling. Soot deposition;

   Sammanfattning : A diesel fuel injector has been modified to allow rotationaround its axis, driven by an electric motor. Injections at upto 6000 rpm from the rotating injector have been investigatedunder the influence of air swirl on one optical research engineand one optically accessible heavy-duty diesel engine. LÄS MER

7. 35. Modeling Diesel spray combustion using a Detailed Chemistry Approach

   Författare :Jonas Edman; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : The rapid development of computer hardware during the past decade has contributed substantially to advances in almost all branches of science. Computer modeling is being applied to increasingly small physical scales and increasingly large domains, facilitating the generation of advanced phenomenological models and models based on first principles. LÄS MER