Sökning: "hollow cone spray"

Visar resultat 1 - 5 av 7 avhandlingar innehållade orden hollow cone spray.

1. 1. Numerical Modelling of Fuel Injection and Stratified Turbulent Combustion in a Direct-Injection Spark-Ignition Engine Using an Open Source Code

   Författare :Chen Huang; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; hollow-cone spray; KHRT; liquid penetration; CFD; OpenFOAM; Flame Speed Closure FSC ; ignition delay; SMD; gasoline surrogate; laminar flame speed; presumed PDF; Spray-Guided Gasoline Direct Injection engine; chemical mechanism; modelling; premixed stratified turbulent combustion;

   Sammanfattning : Stringent regulations on the emission of pollutants, especially carbon dioxide (CO2), necessitate the development of advanced combustion technologies. Gasoline direct injection (GDI) into the combustion chamber of a Spark Ignition (SI) engine is a combustion strategy that is widely recognized as having the potential to improve fuel efficiency of internal combustion engines for passenger cars. LÄS MER

3. 2. Hollow cone gasoline/ethanol sprays under cold start conditions

   Författare :Jonas Wärnberg; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; SIDI; Cold start; PIV; Piezo-injector; PDA; Ethanol; SI; SGDI; E85; Direct injection stratified charge; LIF; Spark ignition; Mie;

   Sammanfattning : To decrease the release of CO2 from fossil fuels into the atmosphere, within the transportation sector the efficiency of vehicles and their engines must be increased. Additionally renewable fuels may be used to further decrease our reliance on fossil fuels. LÄS MER

4. 3. Simulation of Combustion and Mixture Formation for Gasoline Direct Injection Engine Application

   Författare :Chen Huang; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VSB2; Reitz-KHRT; gasoline surrogate; LISA; sensitivity study.; Reitz-Diwakar; Trajectory collision; laminar flame speed; chemical kinetics; TAB; Rosin-Rammler; ignition delay; OpenFOAM; ethanol; O Rourke collision; SMD; hollow cone spray; liquid penetration;

   Sammanfattning : The development and introduction of new engine technologies are primarily motivated by the need to comply with increasingly stringent emissions legislation and to reduce fuel consumption. One of the most important of these new engine technologies is direct gasoline injection, which is considered to be an important and cost-effective measure to meet both targets. LÄS MER

5. 4. Optical Diagnostics Applied to Internal Combustion Engines: Catalysis, Sprays and Combustion

   Författare :Stina Hemdal; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; sprays; Optical diagnostics; engines; ; combustion; spray-guided; SGDI; Direct-injection; catalys;

   Sammanfattning : Gasoline direct injection with spray-guided charge formation is one of the most promising concepts to reduce fuel consumption and CO2 emissions of spark ignited engines. The advantages with the system are owing to un-throttled operation and stratification of the injected fuel resulting in a globally lean combustion. LÄS MER

7. 5. Droplet size, concentration, and temperature mapping in sprays using SLIPI-based techniques

   Författare :Yogeshwar Nath Mishra; Förbränningsfysik; []
   Nyckelord :Sprays; Optical measurements; Laser diagnostic; Droplet size; Temperature; Fysicumarkivet A:2018:Mishra;

   Sammanfattning : Structured laser illumination planar imaging (SLIPI) is a technique capable of suppressing multiple light scattering effects in optically dense sprays, resulting in spray images without blurs and with enhanced contrast. The novelty of the work presented in this thesis concerns the applications of a variety of SLIPI-based techniques for the measurement of droplet size, droplet concentration, and liquid temperature in atomizing sprays. LÄS MER