Sökning: "laser machining"
Visar resultat 11 - 15 av 28 avhandlingar innehållade orden laser machining.
11. Effect of Stress Relief Annealing: Part Distortion, Mechanical Properties, and Microstructure of Additively Manufactured Austenitic Stainless Steel
Sammanfattning : Additive manufacturing (AM) processes may introduce large residual stresses in the as-built part, in particular the laser powder bed fusion process (L-PBF). The residual stress state is an inherent consequence of the heterogeneous heating and subsequent cooling during the process. LÄS MER
12. Powder degradation during powder bed fusion processing: impact of processing conditions and alloy composition
Sammanfattning : In the recent decade, powder bed fusion (PBF) metal additive manufacturing (AM) has attracted huge attention both from the industry and the research community. This effort has helped mature PBF technology as a potential alternative to conventional manufacturing processes as casting, machining, forging, etc. LÄS MER
13. An inductive gap measurement method for square butt joints
Sammanfattning : A recent method in aero engine production is to fabricate components from smaller pieces, rather than machining them from large castings. This has made laser beam welding popular, offering high precision with low heat input and distortion, but also high productivity. LÄS MER
14. Microstructure Modelling of Additive Manufacturing of Alloy 718
Sammanfattning : In recent years, additive manufacturing (AM) of Alloy 718 has received increasing interest in the field of manufacturing engineering owing to its attractive features compared to those of conventional manufacturing methods. The ability to produce complicated geometries, low cost of retooling, and control of the microstructure are some of the advantages of the AM process over traditional manufacturing methods. LÄS MER
15. Compact diode-pumped solid-state lasers
Sammanfattning : Compact diode-pumped solid-state lasers (DPSSL) arecontinuously replacing traditional gas lasers as well asenabling completely new technology. However, compact and costefficient designs are required to satisfy end-user demands. Theaim of this thesis was therefore to investigate novel laserdesigns for given applications considering these demands. LÄS MER