Sökning: "junction field-effect transistors JFETs"
Hittade 5 avhandlingar innehållade orden junction field-effect transistors JFETs.
1. Simulation and Electrical Evaluation of 4H-SiC Junction Field Effect Transistors and Junction Barrier Schottky Diodes with Buried Grids
Sammanfattning : Silicon carbide (SiC) has higher breakdown field strength than silicon (Si), which enables thinner and more highly doped drift layers compared to Si. Consequently, the power losses can be reduced compared to Si-based power conversion systems. Moreover, SiC allows the power conversion systems to operate at high temperatures up to 250 oC. LÄS MER
2. Design and process issues of junction- and ferroelectric-field effect transistors in silicon carbide
Sammanfattning : In todays solid-state electronics, Si and SiO2 are thedominant materials used. However, new materials such as SiC orferroelectrics are required for some special applications sincesuperior characteristics can be achieved in electronic devices. LÄS MER
3. On Gate Drivers and Applications of Normally-ON SiC JFETs
Sammanfattning : In this thesis, various issues regarding normally-ON silicon carbide (SiC)Junction Field-Effect Transistors (JFETs) are treated. Silicon carbide powersemiconductor devices are able to operate at higher switching frequencies,higher efficiencies, and higher temperatures compared to silicon counterparts. LÄS MER
4. Extreme Implementations of Wide-Bandgap Semiconductors in Power Electronics
Sammanfattning : Wide-bandgap (WBG) semiconductor materials such as silicon carbide (SiC) and gallium-nitride (GaN) allow higher voltage ratings, lower on-state voltage drops, higher switching frequencies, and higher maximum temperatures. All these advantages make them an attractive choice when high-power density and high-efficiency converters are targeted. LÄS MER
5. On SiC JFET converters: components, gate-drives and main-circuit conditions
Sammanfattning : This thesis deals with Silicon Carbide Junction Field Effect Transistors (SiC JFETs) - how to use them to their full potential in power electronic circuits, how to model them in a power electronic simulation program, and how a gate drive can be built. To fully utilize the low on-state losses of SiC JFETs it is suggested that SiC JFETs should not be equipped with anti-parallel diodes. LÄS MER