Sökning: "high-pressure zone"

Visar resultat 1 - 5 av 30 avhandlingar innehållade orden high-pressure zone.

1. 1. High Pressure Jet Assistance in Steel Turning

   Författare :Patrik Dahlman; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Jet Assistance; Tool Life; Chip Control; Turning; Ultra High Pressure Cooling; Jet Momentum;

   Sammanfattning : Steel turning is one of the most common industrial processes today. It is a very old process, where a lot of improvements and optimisations have been done throughout history. But, the struggle for further cost reductions pushes the process development into new areas. LÄS MER

3. 2. Experimental Investigations of High Pressure Catalytic Combustion for Gas Turbine Applications

   Författare :Jeevan Jayasuriya; Torsten Fransson; Groppi Gianpiero; KTH; []
   Nyckelord :Gas Turbine Combustion; Catalytic Combustion; High Pressure; Ultra-low emissions; SRA - Energy; SRA - Energi;

   Sammanfattning : This work is devoted to generate knowledge and high quality experimental data of catalytic combustion at operational gas turbine conditions.The initial task of the thesis work was to design and construct a high pressure combustion test facility, where the catalytic combustion experiments can be performed at real gas turbine conditions. LÄS MER

4. 3. Characterization of WC-Co tools used for machining of Alloy 718 under the influence of high-pressure coolant supply

   Författare :Philipp Hoier; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; erosion; surface-modifications; High-pressure coolant supply; Alloy 718; tool wear; vapor-barrier;

   Sammanfattning : The use of high-pressure jets for supply of coolant to the cutting zone has the potential to significantly increase the productivity and process stability when machining difficult-to-cut materials such as Ni-based superalloys. Apart from better chip-breakability, the jets enable the coolant to reach closer to the cutting edge and hence enhance its capability to dissipate heat. LÄS MER

5. 4. Experimental Study of some Potassium and Sodium Bearing Aluminosilicates at High Temperatures and High Pressures

   Författare :Faramarz Tutti; Uppsala universitet; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Earth sciences; Phlogopite; Orthoclase; Jadeite; Albite; Calcium ferrite; Hollandite; Dehydroxylation; High temperature; High pressure; Lower mantle; Geochemistry; Geovetenskap; Earth sciences; Geovetenskap; mineralogi; petrologi och tektonik; Mineral Chemistry; Petrology and Tectonics;

   Sammanfattning : This dissertation presents the results of a high-temperature and high-pressure experimental study of some abundant aluminositicates, which are the main repositories for the two geochemically important elements, sodium and potassium, in the Earth's crust. Phase transitions of end member alkali feldspars and jadeite clinopyroxene are studied at high and ultrahigh pressures corresponding to the conditions between the transition zone and the deep Earth's lower mantle. LÄS MER

7. 5. Experimental studies of turbulent flames at gas turbine relevant burners and operating conditions

   Författare :Xin Liu; Förbränningsfysik; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Turbulent Combustion; Gas Turbine; Laser diagnostic; Fuel flexibility; Plasma-assisted combustion; Ammonia flame; High pressure;

   Sammanfattning : With the increasing demand of using alternative and renewable fuels, it becomes of vital importance to consider the fuel flexibility when designing a new burner for gas turbines. Hydrogen-enriched fuel and ammonia are two of these potential fuels, and they can significantly change the operability range of the gas turbines. LÄS MER