Sökning: "billets"
Visar resultat 1 - 5 av 10 avhandlingar innehållade ordet billets.
1. Understanding surface defects on direct chill cast 6xxx aluminium billets
Sammanfattning : .... LÄS MER
2. Magnetic Fields and Induced Power in the Induction Heating of Aluminium Billets
Sammanfattning : Induction heating is a common industrial process used for the reheating of billets before extrusion or forging. In this work the influence of the coil and work piece geometry, the effect of the electrical properties of the work piece, and the coil current and frequency, on the magnetic flux density and resulting work piece heating rates were studied. LÄS MER
3. Investigation of Surface Formation in As-Cast and Homogenized 6xxx Aluminium Billets
Sammanfattning : The direct chill (DC) casting technique to produce billets for extrusion and ingots for rollingwas developed in the 1930s. The principle, which is still valid, is a two-stage cooling with a primary cooling at a mould surface followed by water spraying directly on the surface. LÄS MER
4. On some positive effects of swirling flow for the continuous cast mould billets
Sammanfattning : Continuous caster moulds are the last and most important stage in the steelmaking process, where inclusions can either be generated or removed. With increasing casting speed using conventional immersion nozzles critical problems, such as unstable bulk mould flow have been noticed. LÄS MER
5. Semi-Solid Casting of Aluminium and Magnesium Alloys: Slurry Production and Rheocasting using the Rapid Slurry Forming Technology
Sammanfattning : Semi-solid casting was developed in the early 1970’s and involves the use of a partially solidified metal slurry. This method of casting has become a popular alternative for production of automobile components. LÄS MER