Sökning: "Inelasticity"

Visar resultat 1 - 5 av 11 avhandlingar innehållade ordet Inelasticity.

  1. 1. Macroscale Modelling of 3D-Woven Composites: Inelasticity, Progressive Damage and Final Failure

    Författare :Carolyn Oddy; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 3D-woven composites; Anisotropy; Damage; Inelasticity; Phase-field; Failure;

    Sammanfattning : Composites with 3D-woven reinforcement have been slowly making their way into different industrial applications. The interlacement of yarns, not only in-plane but also through-thickness, means that in many applications 3D-woven composites can outperform their laminated counterparts. LÄS MER

  3. 2. Modelling 3D-woven composites on the macroscale: Predicting damage initiation and inelastic phenomena

    Författare :Carolyn Oddy; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 3D-woven composites; Anisotropy; Inelasticity; Damage initiation;

    Sammanfattning : Composites with 3D-woven reinforcement have been slowly making their way into different industries. The interlacement of yarns, not only in-plane but also through-thickness, means that in many applications 3D-woven composites can outperform their laminated counterparts. LÄS MER

  4. 3. On computational homogenization of gradient crystal inelasticity

    Författare :Kristoffer Carlsson; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; computational homogenization; gradient theory; multiscale modeling; crystal plasticity;

    Sammanfattning : Crystal inelasticity is the main modeling technique employed to study the mechanical behavior of polycrystalline metallic materials. This class of models has the capability to represent micromechanical phenomena such as plastic slip, grain boundary interactions, and dislocation pile-up. LÄS MER

  5. 4. The effect of inelastic deformation on crack loading

    Författare :Dimosthenis Floros; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Numerical simulation; Mixed mode; Configurational mechanics; Gradient plasticity;

    Sammanfattning : Rolling contact fatigue (RCF) cracks in rails are among the most detrimental railway track defects, in relation to reliability and cost. The cracks grow in a mixed mode II & III, which in combination with the rotating stress field in the neighborhood of the crack-tip, large plastic deformations on the rail surface, crack face friction due to the compressive stresses from the wheel load and anisotropic crack growth resistance, add to the complexity related to the study of RCF cracks. LÄS MER

  7. 5. Continuum modelling of particle flows in high shear granulation

    Författare :Per Abrahamsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; parameter study; High shear granulation; continuum modelling; resolution dependence; granular flow; compartment model; kinetic theory of granular flow;

    Sammanfattning : High shear granulation is an important process in the pharmaceutical industry. The aim of the process is to produce granules with specific properties, like size and hardness, from powder mixtures. The properties of the granules are determined by the flow field in the mixer. LÄS MER