Sökning: "GjutninG"

Visar resultat 11 - 15 av 47 avhandlingar innehållade ordet GjutninG.

1. 11. On the Spray Forming of Metals, the Formation of Porosity and the Heat Evolution during Solidification

   Författare :José Tinoco; KTH; []
   Nyckelord :Thermal analysis; Nodular Cast Iron; Inconel 625; CFD; Flow Assesment; Multiphase Flow; Spray Deposition; Microporosity; Superalloys;

   Sammanfattning : This thesis deals with the heat evolution duringsolidification and its relation to the formation of porosity.It intends to improve the current understanding of theformation of porosity in cast materials with special interestin nodular cast iron and the spray forming process. LÄS MER

3. 12. A Study On Factor Influencing the Microstructure and Shrinkage Porosity Formation in Compacted Graphite Iron

   Författare :Sadaf Vazehrad; Pär Jönsson; Attila Dioszegi; Steve Dawson; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CGI; LGI; SGI; Solidification; Microstructure; Shrinkage porosity; Eutectic colony; Microsegregation;

   Sammanfattning : During the last decades, an intensive effort has been dedicated to introduce compacted graphite iron (CGI) for truck engine components as its intermediate graphite morphology provides an increased tensile property compared to lamellar cast iron (LGI) and a better thermal conductivity compared to nodular cast iron (SGI). However, the narrow production technology window in this cast iron grade requires increased technological discipline. LÄS MER

4. 13. Casting and anodising of Al alloys- Alloy design, manufacturing process and material properties

   Författare :Baiwei Zhu; Caterina Zanella; Rajan Ambat; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cast aluminium; Semi-solid casting; Anodising; Gjutning av aluminium; semi-solid gjutning; anodisering; komponent; gjutlegering; kisel; järn;

   Sammanfattning : Casting and semi-solid metal (SSM) casting are widely used to manufacture near-net-shape components of Al-Si alloys in the automotive and electronic industries. In such applications, casting components need to meet the combined requirements of good mechanical properties and corrosion and wear resistance. LÄS MER

5. 14. On the influence of imperfections on microstructure and properties of recycled Al-Si casting alloys

   Författare :Anton Bjurenstedt; Salem Seifeddine; Anders E.W. Jarfors; Arne Dahle; Johan Moverare; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Imperfections; Recycled Al-Si alloys; Fe-rich intermetallics; Melt quality; Fractography; Defekter; Återvunna Al-Si legeringar; Fe-rika intermetaller; Smältakvalité; Fraktografi;

   Sammanfattning : There are great energy savings to be made by recycling aluminium; as little as 5% of the energy needed for primary aluminium production may be required. Striving to produce high quality aluminium castings requires knowledge of microstructural imperfections, which is extra important when casting recycled aluminium that generally contains higher levels of imperfections compared to primary aluminium. LÄS MER

7. 15. Imperfections in Recycled Aluminium-Silicon Cast Alloys

   Författare :Anton Bjurenstedt; Anders Jarfors; Salem Seifeddine; Pål Schmidt; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Imperfections; Recycled cast Al-Si alloy; Fe-rich particles; Melt quality; Fractography; Differential scanning calorimetry.;

   Sammanfattning : In striving to produce high quality cast components from recycled aluminium alloys,imperfections have to be considered, because recycled aluminium usually containsmore of it. However, there are great energy savings to be made by using recycledaluminium; as little as 5% of the energy needed for primary aluminium productionmay be required. LÄS MER