Sökning: "Fractography"

Visar resultat 1 - 5 av 23 avhandlingar innehållade ordet Fractography.

  1. 1. Plastic Deformation of Duplex Stainless Steel

    Författare :Magnus Nyström; Chalmers University of Technology; []
    Nyckelord :stainless steel; microstructure; plastic zones; impact toughness; anisotropy; prestraining; annealing; fractography; fatigue;

    Sammanfattning : Duplex austenitic/ferritic stainless steels are increasingly used as an alternative to conventional austenitic grades. Main advantages of the duplex grades are good resistance to corrosion cracking and corrosion fatigue in environments that contain chloride. LÄS MER

  2. 2. Damage Tolerance of Impacted Composite Sandwich Structures

    Författare :Moeen ud din Saeed Rajput; Malin Åkermo; Stefan Hallström; Magnus Burman; Christian Berggreen; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; composite sandwich; cellular; polymer; material characterization; modulus; non-crimp fabric; low velocity impact; vibration; uncertainty analysis; drop-weight impact; fractography; barely visible impact damage; X-ray microtomography; compression-after-impact; bending-after-impact; high speed image processing; damage resistance; damage tolerance; Aerospace Engineering; Flyg- och rymdteknik;

    Sammanfattning : This thesis deals with damage tolerance of impacted sandwich structures for load bearing applications. Composite sandwich structures find wide application as lightweight solutions in aerospace components, since weight reduction and less fuel emissions are primary concerns for aircraft manufactures. LÄS MER

  3. 3. Thermoplastic composites based on commingled yarns

    Författare :Jonas Bernhardsson; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; consolidation; impact; fractography; warp-knitted; processng; commingled yarns;

    Sammanfattning : .... LÄS MER

  4. 4. Imperfections in Recycled Aluminium-Silicon Cast Alloys

    Författare :Anton Bjurenstedt; Anders Jarfors; Salem Seifeddine; Pål Schmidt; Högskolan i Jönköping; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Imperfections; Recycled cast Al-Si alloy; Fe-rich particles; Melt quality; Fractography; Differential scanning calorimetry.;

    Sammanfattning : In striving to produce high quality cast components from recycled aluminium alloys,imperfections have to be considered, because recycled aluminium usually containsmore of it. However, there are great energy savings to be made by using recycledaluminium; as little as 5% of the energy needed for primary aluminium productionmay be required. LÄS MER

  5. 5. On the influence of imperfections on microstructure and properties of recycled Al-Si casting alloys

    Författare :Anton Bjurenstedt; Salem Seifeddine; Anders E.W. Jarfors; Arne Dahle; Johan Moverare; Högskolan i Jönköping; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Imperfections; Recycled Al-Si alloys; Fe-rich intermetallics; Melt quality; Fractography; Defekter; Återvunna Al-Si legeringar; Fe-rika intermetaller; Smältakvalité; Fraktografi;

    Sammanfattning : There are great energy savings to be made by recycling aluminium; as little as 5% of the energy needed for primary aluminium production may be required. Striving to produce high quality aluminium castings requires knowledge of microstructural imperfections, which is extra important when casting recycled aluminium that generally contains higher levels of imperfections compared to primary aluminium. LÄS MER