Sökning: "Crack"

Visar resultat 36 - 40 av 544 avhandlingar innehållade ordet Crack.

  1. 36. Water resistance of Scots pine joints produced by linear friction welding

    Författare :Mojgan Vaziri; Lars-Olof Nilsson; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wood; wood welding; crack; CT scanning; image processing; MRI; microdensitometry; CPMAS C NMR; density; water absorption; tensile-shear strength; Träteknik; Wood Technology;

    Sammanfattning : Wood welding is a mechanical friction process allowing the assembly of timber without any adhesives. The process consists of applying mechanical friction, under pressure, alternately to the two wood surfaces to be welded. LÄS MER

  3. 37. Modelling of ultrasonic testing for cracks near a non-planar surface

    Författare :Jonathan Westlund; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ultrasonics; BIEM; Elastic waves; Nondestructive testing; Crack; BEM.;

    Sammanfattning : Nondestructive testing using ultrasound has important applications in e.g. the nuclear power and aerospace industries, where it is used to inspect safety-critical parts for flaws. LÄS MER

  4. 38. Fatigue life prediction of additively manufactured ductile nickel-based superalloys : Constitutive and crack initiation modelling

    Författare :Thomas Lindström; Daniel Leidermark; Kjell Simonsson; Robert Eriksson; Magnus Ekh; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Low-cycle fatigue; Thermomechanical fatigue; Constitutive modelling; Anisotropy;

    Sammanfattning : This dissertation was produced at the Division of Solid Mechanics at Linköping University, and is the final result of a project that included mechanical testing and modelling of an additively manufactured ductile nickel-based superalloy.The main objective of the work presented in this thesis was to investigate and model the cyclic behaviour and the fatigue life behaviour of an additively manufactured ductile nickel-based superalloy, with emphasis on modelling the stabilised material behaviour, by which fatigue life predictions can be based upon. LÄS MER

  5. 39. Automated performance monitoring of concrete dams

    Författare :Christian Bernstone; Teknisk geologi; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hydrogeologi; teknisk geologi; geographical and geological engineering; Maintenance; Uplift pressure; Crack; Deformation; Image processing; Dams; Condition monitoring; Time-domain reflectometry; GPS; Image analysis; Concrete structures; teknisk geografi; Hydrogeology;

    Sammanfattning : The Swedish hydropower industry operates a large number of power plants and dams geographically spread over the country. The level of safety of a specific dam is to a large extent determined during the design and construction phases that in the case of Swedish hydropower plants took place several decades ago. LÄS MER

  7. 40. Modelling of surface initiated rolling contact fatigue crack growth using the asperity point load mechanism

    Författare :Dave Hannes; Bo Alfredsson; Anders Ekberg; KTH; []
    Nyckelord :rolling contact fatigue; spalling; asperity; fatigue crack path; fatigue crack growth; mode I; plane mixed-mode; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : .... LÄS MER