Functionalization, Characterization and Applications of Oxidized Nanocellulose Derivatives

Sammanfattning: Cellulose, a sustainable raw material derived from nature, can be used for various applications following its functionalization and oxidation. Nanocellulose, inheriting the properties of cellulose, can offer new properties due to nanoscale effects, in terms of high specific surface area and porosity. The oxidation of cellulose can provide more active sites on the cellulose chains, improving its functionalization and broadening applications. Two kinds of oxidation and their corresponding applications are described in this thesis: periodate oxidation and Oxone® oxidation.2,3-dialdehyde cellulose (DAC) beads were prepared from Cladophora nanocellulose via periodate oxidation, and were further modified with amines via reductive amination. Several diamines were selected as possible crosslinkers to produce porous DAC beads, which showed higher porosity, stability in alkaline solution and enhanced thermal stability.After functionalization of DAC beads with L-cysteine (DAC-LC), thiol, amine and carboxyl groups were introduced into the DAC beads, endowing the DAC-LC beads with high adsorption capacity for palladium. The synthesized DAC-LC beads were character­ized with SEM, FTIR, XPS, TGA, BET and XRD and the palladium adsorption process was investigated.Chitosan was employed as a crosslinker in functionalization of DAC beads (DAC-CS). The conditions for the synthesis of DAC-CS beads were screened and verifying the stability of the beads in alkaline solution. The DAC-CS beads produced were investigated using SEM, FTIR, XPS, TGA and BET, and the adsorption and desorption capacity of Congo red was studied, indicating DAC-CS beads have potential as sorbent.Oxone oxidation of cellulose is a novel one-pot oxidation method in which mainly the hydroxyl groups on C6 are oxidized to produce carboxylic acid groups on the cellulose chains. To increase the efficiency of Oxone oxidation, several reaction parameters were studied. Cellulose pulp and Cladophora nanocellulose were chosen as prototypes to investigate the effects of oxidation, and the physico­chemical properties of the oxidized products were characterized. Cellulose pulp, pretreated with Oxone oxidation, was disintegrated by homogenization to prepare cellulose nanofibers (CNF). The effect of pre­treat­ment on the preparation of CNF was studied, and the results indicated that Oxone oxidation was efficient in the production of CNF.