Sökning: "slot lines"

Visar resultat 1 - 5 av 7 avhandlingar innehållade orden slot lines.

1. 1. Planar Quasiparticle Mixer Structures for Millimeter and Sub-Millimeter Wave Receivers

   Författare :Anders Skalare; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; SIS receiver; dipole array antenna; slot substrate mode loss; millimeter wave regime; planar antennas; sub-millimeter wave regime; superconducting mixers; slot radiation; slot lines; slot wavelengths; Voltage Matching Method;

   Sammanfattning : The paper covers various aspects of integrating planar antennas with superconducting mixers in the millimeter and sub-millimeter wave regime. The construction of an 80-100 GHz tapered slot antenna and SIS mixer chip with a minimum double side band noise temperature of 240 K is described. LÄS MER

3. 2. Gap Waveguide: Low Loss Microwave Passive Components and MMIC Packaging Technique for High Frequency Applications

   Författare :Ashraf Uz Zaman; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Quasi TEM; Slot Array; PMC; Gap waveguide; Narrow-band Filter;

   Sammanfattning : The heavy congestion at the existing radio frequency spectrum allocated for the today’s wireless communications motivates and accelerates the research work at mmWave bands or even higher frequency range where more spectrum space is available for massive data rate delivery. The inclination of modern wireless system research and development is towards small size, reliable, high-performance and high-yield microwave multifunctional products. LÄS MER

4. 3. Towards Gap Waveguide Array Antenna for Millimeter Wave Applications

   Författare :Abbas Vosoogh; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; gap waveguide; Electric Discharge Machining EDM ; Artificial Magnetic Conductor AMC ; slot array antenna; low sidelobe; high effciency; millimeter wave; aperture efficiency; Bandpass filter BPF ;

   Sammanfattning : The millimeter wave frequency range has got a lot of attention over the past few years because it contains unused frequency spectrum resources that are suitable for delivering Gbit/s end-user access in areas with high user density. Due to the limited output power that current RF active components can deliver in millimeter waves, antennas with the merits of low profile, high gain, high effciency and low cost are needed to compensate free space path loss and increase the communication distance for the emerging high data rate wireless systems. LÄS MER

5. 4. Microwave and Millimeter-Wave Monolithic Integrated Circuits in CMOS and GaAs-mHEMT Technologies

   Författare :Bahar M. Motlagh; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; MMIC; power divider; double-slot antenna; 60 GHz; millimeter-wave; GaAs-mHEMT; CMOS integrated circuits; antenna integration; noise measurement; 100 nm mHEMT technology; balun; capacitor; microstrip line; single-ended; 90 nm CMOS technology; single-balanced; resistive mixer; 210 GHz;

   Sammanfattning : The objective of this work has been to design and characterize microwave and millimeter-wave components and circuits within a 90 nm Si-CMOS process and a 100 nm GaAs-mHEMT process. The work is divided in two parts depending on the technology. LÄS MER

7. 5. Timetable evaluation with focus on quality for travellers

   Författare :Jennifer Warg; Markus Bohlin; Olsson Nils; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Capacity evaluation; railway simulation; economic assessment; delays; timetable analysis; Transportvetenskap; Transport Science;

   Sammanfattning : Punctuality and reliability are important for travellers. Railway lines with heterogeneous and dense traffic have proved to be prone to generate delays. Faster services and increased traffic have to be counterbalanced with measures for increased reliability. Efficient timetable planning can improve the use of such lines. LÄS MER