Sökning: "powder metallurgy"

Visar resultat 6 - 10 av 133 avhandlingar innehållade orden powder metallurgy.

1. 6. Aspects of building geometry and powder characteristics in powder bed fusion

   Författare :Alexander Leicht; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; direct metal laser sintering; stainless steel; powder recycling; thin wall structures; 316L; microstructure; electron beam melting; powder bed fusion; additive manufacturing;

   Sammanfattning : Additive manufacturing (AM) produces near-net-shaped parts directly from a 3D-CAD model in a layer-by-layer manner. One of the most common AM technique for fabricating metallic components is powder bed fusion (PBF). The PBF process has shown great potential in fabricating metallic parts with properties better or comparable to conventional methods. LÄS MER

3. 7. Laser-based powder bed fusion of stainless steels

   Författare :Dmitri Riabov; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; additive; 316L; maraging; oxidation; oxides; morphology; atomization; flowability; PBF-LB; mechanical properties; spreadability; precipitates; surface; powder; ODS;

   Sammanfattning : The aim of the present work has been to widen the knowledge of how variations within powder manufacturing affect laser-based powder bed fusion processing, and how this processing affects the microstructure and strength of stainless steels. The approach was to keep the processing parameters fixed while the powder feedstock was varied. LÄS MER

4. 8. Powder degradation during powder bed fusion processing: impact of processing conditions and alloy composition

   Författare :Ahmad Raza; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; residual oxygen; powder bed fusion – electron beam; powder degradation; oxidation; Alloy 718; AlSi10Mg; powder bed fusion - laser beam; TiAl6V4; Hastelloy X.; sublimation; spatter particles; Keywords: additive manufacturing;

   Sammanfattning : In the recent decade, powder bed fusion (PBF) metal additive manufacturing (AM) has attracted huge attention both from the industry and the research community. This effort has helped mature PBF technology as a potential alternative to conventional manufacturing processes as casting, machining, forging, etc. LÄS MER

5. 9. Biomaterial Components Prepared by Titanium Powder Technology

   Författare :Mikael Eriksson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; dental; coping; biomaterial; titanium-hydroxyapatite composite; crown; cold isostatic pressing; deformation; titanium powder; high velocity compaction; powder metallurgy;

   Sammanfattning : The main objectives of this work were twofold: First, to determine if a pressed-powder method could be used to fabricate titanium dental copings, and to line out what problems or benefits this new method would have. Second, to test if high velocity compaction of titanium powder could be used to form biomaterial components such as copings or dental implants. LÄS MER

7. 10. Delubrication of Chromium Prealloyed Powder Metallurgy Steels

   Författare :Seshendra Karamchedu; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; alloyed sintered steels; delubrication; surface oxide; sintering atmosphere; processing atmosphere control; lubricant;

   Sammanfattning : Consolidation of steel components produced by means of powder metallurgy (PM) is achieved typically through compaction and sintering. During consolidation, final dimensions of the part are already achieved after compaction, while sintering imparts strength to the components. LÄS MER