Sökning: "kondens"
Visar resultat 1 - 5 av 6 avhandlingar innehållade ordet kondens.
1. Putsens inverkan på fasadens fuktbalans
Sammanfattning : The report deals with the effect of renderings on the moisture balance in facades. The main therne is the moisture mechanism in cnnnection with different moisture sources. Different opinions about moisture in facades and consequences of moisture are mentioned as a background. LÄS MER
2. Localised corrosion and atmospheric corrosion of stainless steels
Sammanfattning : This research is focused on defining limiting conditions for corrosion of stainless steels. The aim of the first part (Papers I-IV) was to understand the role of alloying level and environmental parameters on localised corrosion in aqueous conditions. LÄS MER
3. Advances in Ventilation Heat Recovery : An assessment of peak loads shaving using renewables
Sammanfattning : The building sector accounts for approximately 40% of total global energy usage.In residential buildings located in cold climate countries, 30-60% of this energy isused for space heating, 20–30% is lost by discarded residential wastewater, and therest is devoted to ventilation heat loss. LÄS MER
4. Laminar-flow Liquid-to-air Heat Exchangers - Energy-efficient Display Cabinet Applications
Sammanfattning : Provisions are stored and displayed in supermarkets and grocery stores, at a temperature lower than the ambient, in display cabinets, which are responsible for a significant amount of the energy use in this sector. During the 1990s, major changes in the regulations governing the use of synthetic refrigerants took place in Sweden. LÄS MER
5. Metoder att välja korrektioner vid fuktberäkningar med variabelt utomhusklimat
Sammanfattning : Determination of the design conditions for moisture resistance requires in a Moisture Design number of different moisture calculations to be made in order to determine the moisture status within, or on the surface of, a structure. The objective of this work has been to ascertain how to allow for variations in climate data in order to be able to determine the most unfavourable moisture status likely to be encountered during the life of a building. LÄS MER