Avancerad sökning
Visar resultat 1 - 5 av 64 avhandlingar som matchar ovanstående sökkriterier.
1. Structure and properties of thick plate and near surface properties after high speed machining af AA7010
Sammanfattning : Using thick plates instead of forgings in the aircraft industry for integral construction of load carrying components is becoming more and more practice. The reasons are shorter lead-times from design of a modified or totally new component to introduction in an aircraft and smaller variations in properties for plate compared to forging. LÄS MER
2. Reuse of construction materials : Environmental performance and assessment methodology
Sammanfattning : Reuse is a measure for resource-saving materials and energy use, which is stressed in the concept of kretsloppsanpassning, or societal industrial ecology (SIE), as it will be termed in this thesis. Reuse is here used as a general term for any kind of reuse and divided into recirculation, upgrading and cascading, according to the degradation of the inner material structure. LÄS MER
3. Water and alkali salts in the hydrating and hardened green cement-based materials: Hydration process, moisture content and transport
Sammanfattning : Reducing CO2 emissions in the production of cementitious binder is the most effective way to decrease the environmental impact of the construction industry, so a large amount of supplementary cementitious materials (SCMs) has been used in the green concrete. Both the SCMs and alkali salts in binders influence the hydration process and the structure in hardened cement-based materials. LÄS MER
4. Laser welding of boron steels for light-weight vehicle applications
Sammanfattning : Laser beam welding has gained a significant interest during the last two decades. The suitability of the process for high volume production has the possibility to give a strong advantage compared to several other welding methods. However, it is important to have the process in full control since various quality issues may otherwise occur. LÄS MER
5. Recovery of iron and manganese values from metallurgical slags by the oxidation route
Sammanfattning : In the modern practice, a sustainable development strategy in a domain of wasteutilization is shifting its focus from a general completeness of recycling to a morespecific attention to efficiently utilize elements in the wastes. This is well-illustrated bythe steelmaking slag industries. LÄS MER