Sökning: "Powder mechanics"

Visar resultat 16 - 20 av 43 avhandlingar innehållade orden Powder mechanics.

  1. 16. Particle Methods for Modelling Granular Material Flow

    Författare :Simon Larsson; Pär Jonsén; Hans-Åke Häggblad; Gustaf Gustafsson; Eugenio Oñate; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : Granular materials are very abundant in nature and are often used in industry, wherethe dynamics of granular material ow is of relevance in many processes. There arestrong economic and environmental incentives for increased eciency in handling andtransporting granular materials. LÄS MER

  3. 17. Displacement field measurement using digital speckle photography for characterisation of materials subjected to large deformations and high strain rates

    Författare :Jörgen Kajberg; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : In many technical processes, material is deformed under conditions involving large deformations (strains) and/or high strain rates. Examples of such processes are collisions, impact, penetration, metal forming, powder compaction and crack propagation. LÄS MER

  4. 18. Measurements of deformations and flows inside optically nontransparent materials

    Författare :Fredrik Forsberg; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Experimentell mekanik; Experimental Mechanics;

    Sammanfattning : When a material is mechanically loaded or experience environmental changes such as for example thermal or pressure variations it is affected, in some way, due to these new conditions. In order to measure engineering properties related to these structural changes, such as for example deformation and strain, we need to gain information about them that are precise and reliable. LÄS MER

  5. 19. Simulation of additive manufacturing using a mechanism based plasticity model

    Författare :Andreas Malmelöv; Andreas Lundbäck; Mathias Wallin; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Residual stress; Material model; Alloy 625; Alloy 718; deformations; Finite Element Method; synchrotron X-ray diffraction; Solid Mechanics; Hållfasthetslära;

    Sammanfattning : This thesis presents finite element (FE) simulations of additive manufacturing (AM) and physically based material modeling of alloy 625 and alloy 718. In recent years, there has been an increasing interest in AM and there has been a dramatic increase in publications in the field. LÄS MER

  7. 20. Micromechanics of Powder Compaction

    Författare :Erik Olsson; Per-Lennart Larsson; Christophe Martin; KTH; []
    Nyckelord :Hållfasthetslära; Solid Mechanics;

    Sammanfattning : Compaction of powders followed by sintering is a convenient manufacturing method for products of complex shape and components of materials that are difficult to produce using conventional metallurgy. During the compaction and the handling of the unsintered compact, defects can develop which could remain in the final sintered product. LÄS MER