Sökning: "Materials exposure"

Visar resultat 1 - 5 av 406 avhandlingar innehållade orden Materials exposure.

  1. 1. Evolution of microstructure and nanoscale chemistry of Zircaloy-2-type alloys during nuclear reactor operation

    Författare :Johan Eriksson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Zircaloy-2; Nuclear fuel cladding; Atom probe tomography; Zirconium alloys; Clustering; Dislocation loops; Radiation effects; Boiling water reactor;

    Sammanfattning : Zirconium alloys are used as fuel cladding tubes in nuclear reactors. During reactor operation, these alloys are degraded by corrosion, hydrogen pickup (HPU), and radiation-induced growth, processes influenced by the alloying elements. LÄS MER

  3. 2. Atom probe tomography of Zircaloy-2 exposed to boiling water reactor operation

    Författare :Johan Eriksson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Nuclear fuel claddings; Zirconium alloys; Boiling water reactor; Clustering; Atom probe tomography; Radiation effects; Zircaloy-2; Dislocation loops;

    Sammanfattning : Zirconium alloys are used as cladding tubes for the fuel in nuclear reactors. In boiling water reactors (BWRs), the alloy Zircaloy-2, which contains the alloying elements Sn, Fe, Cr, Ni, and O, is commonly used. LÄS MER

  4. 3. Materials exposure: The interface between materials supply and assembly

    Författare :Christian Finnsgård; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; packaging; production systems; lean production; materials supply; materials handling; Materials exposure; assembly;

    Sammanfattning : This thesis concerns the supply of components to assembly in production sys- tems, and introduces materials exposure as the interface between materials sup- ply systems and assembly systems. The purpose of the thesis is to explain how materials exposure influences the performance of materials supply systems and assembly systems. LÄS MER

  5. 4. Self-Healing Concrete

    Författare :Magdalena Rajczakowska; Andrzej Cwirzen; Karin Habermehl-Cwirzen; Hans Hedlund; Erik Schlangen; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; cementitious materials; self-healing; exposure; fly ash; calcite; C-S-H; cracking; Byggmaterial; Building Materials;

    Sammanfattning : Concrete is a brittle material prone to cracking due to its low tensile strength. Crack repairs are not only expensive and time-consuming but also increase the carbon footprint. Designing a novel concrete material possessing the ability to self-repair cracks would enhance its sustainability. LÄS MER

  7. 5. Influence of combined thermal and mechanical loadings on pearlitic steel microstructure in railway wheels and rails

    Författare :Dimitrios Nikas; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Low cycle fatigue LCF ; Wheel steels; Hardness; TEM; Thermal effects; EBSD; Rail steels; Pearlite; Multiaxial fatigue; Spheroidisation; Materials Science;

    Sammanfattning : One of the most important aspects in railway operation is the interaction between rail and wheel. The contact patch between these two components is around the size of a small coin, and since high loads act on this small area, stresses will give rise to wear and damage in both components. LÄS MER