Sökning: "Heat demand"

Visar resultat 11 - 15 av 324 avhandlingar innehållade orden Heat demand.

  1. 11. Simulations of Evaporation Plants in Kraft Pulp Mills: Including Lignin Extraction and Use of Excess Heat

    Författare :Marcus Olsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; kraft pulp mill.; lignin extraction; heat integration; process integration; energy saving; excess heat; simulation; Energy-efficient evaporation; modelling;

    Sammanfattning : In this thesis, evaporation plants at kraft pulp mills are simulated with the purpose of making them more energy efficient. The work is important since energy saving is assumed to be one of the major solutions for handling the world's energy demand in the future. LÄS MER

  3. 12. Experimental Investigation of Refrigerant Charge Minimisation of a Small Capacity Heat Pump

    Författare :W. Primal D. Fernando; Björn Palm; Alberto Gavallini; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; heat pump; propane; low-charge; Wilson plot method; minichannels; aluminium heat exhangers; single.phase flow; Mechanical and thermal engineering; Mekanisk och termisk energiteknik;

    Sammanfattning : Enormous quantities of heat are available in air, soil, water, exhaust air from buildings, and in waste water of any kind. However these heat sources are use-less for heating purposes since their temperatures are lower than the tempera-ture required for heating. LÄS MER

  4. 13. Heat-transfer simulations applied to electrical machines

    Författare :Kristian Rönnberg; Christophe Duwig; Jens Walther; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; energy efficiency; heat transfer; electric machines; high fidelity simulation; modal analysis; Engineering Mechanics; Teknisk mekanik; Electrical Engineering; Elektro- och systemteknik;

    Sammanfattning : Electrification and energy efficiency are two important aspects in present scenarios describing a sustainable future. Electric motors constitute a large fractionof industry’s electricity demand today, and it is expected to remain high inthe future. LÄS MER

  5. 14. Large Heat Networks in District Heating Systems

    Författare :Akram Sandvall; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; MARKAL; Waste heat; Energy system modeling;

    Sammanfattning : District heating (DH) systems have experienced three generations since the 1880s. In chronological order, high temperature steam and pressurized hot water above and below 100 degrees have been used to carry heat over these three generations. LÄS MER

  7. 15. Intermediate heat exchange in binary distillation

    Författare :Ingela Niklasson Björn; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Intermediate heat exchange; Efficiency.; Diabatic distillation;

    Sammanfattning : AbstractThe overall reason for investigating intermediate heat exchange in diabatic distillation is to enable a reduction in external energy demand.This thesis applies computer simulations and experimental measurements to evaluate and analyse the use of intermediate heat exchange in binary distillation. LÄS MER