Sökning: "Haynes 282"
Visar resultat 11 - 15 av 16 avhandlingar innehållade orden Haynes 282.
11. Modelling of the cyclic behaviour of superalloys
Sammanfattning : In the aviation industry today there is a trend of increasing operating temperatures in turbine engines. The advantages with higher temperatures in the engines are improved performance and efficiency. LÄS MER
12. Cracks in superalloys
Sammanfattning : Gas turbines are widely used in industry for power generation and as a power source at hard to reach locations where other possibilities for electrical power supplies are insufficient. New ways of producing greener energy is needed to reduce emission levels. This can be achieved by increasing the combustion temperature of gas turbines. LÄS MER
13. Effect of Dwell-times on Crack Propagation in Superalloys
Sammanfattning : Gas turbines are widely used in industry for power generation and as a power source at "hard to reach" locations where other possibilities for electrical supply are insufficient. There is a strong need for greener energy, considering the effect that pollution has had on global warming, and we need to come up with ways of producing cleaner electricity. LÄS MER
14. Microstructural evolution during hot compression of a Ni-base superalloy: Dynamic and post-dynamic recrystallization below the secondary carbide solvus temperature
Sammanfattning : With an increased demand to lower emissions, the eciency of aircraft engines have to be improved. One way to achieve this is to increase the operation temperature. However, due to the extremely challenging environments in the hot sections of these engines, the current alloys are at their limits. LÄS MER
15. Weldability of Precipitation Hardening Superalloys – Influence of Microstructure
Sammanfattning : Superalloys and in particular the precipitation hardened Ni-based superalloys havealways been used extensively in the hot sections of jet engines. Large hot structuralengine components with complex geometry have preferably been cast as single piececomponents since the large scale vacuum investment casting process becameavailable about fifty years ago. LÄS MER