Sökning: "coke"

Visar resultat 16 - 20 av 53 avhandlingar innehållade ordet coke.

  1. 16. Experimental Studies of Thermal Diffusivities concerning some Industrially Important Systems

    Författare :Riad Abdul Abas; Seshadri Seetharaman; Rainer Wunderlich; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; laser flash; thermal diffusivity; heat conduction; phonon; electron contribution; crystallisation degree; graphitisation; Metallurgical process engineering; Metallurgisk processteknik;

    Sammanfattning : The main objective of this industrially important work was to gain an increasing understanding of the properties of some industrially important materials such as CMSX-4 nickel base super alloy, 90Ti.6Al.4V alloy, 25Cr:6Ni stainless steel, 0. LÄS MER

  2. 17. Bio-coal as an alternative reducing agent in the blast furnace

    Författare :Asmaa El-Tawil; Lena Sundqvist Öqvist; Bo Björkman; Henrik Saxen; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Devolatilization; torrefied biomass; bio-coal; volatile matter; reduction; blast furnace; Process Metallurgy; Processmetallurgi;

    Sammanfattning : The steel industry is aiming to reduce CO2 emissions by different means; in the short-term, by replacing fossil coal with highly reactive carbonaceous material like bio-coal (pretreated biomass) and, in the longer term, by using hydrogen. The use of bio-coal as part of top charged briquettes also containing iron oxide has the potential to lower the thermal reserve zone temperature of the Blast furnace (BF) and, due to improved gas efficiency, thereby give a high replacement ratio to coke. LÄS MER

  3. 18. Design and Operation of a 10 kWth Chemical-Looping Combustor for Solid Fuels

    Författare :Nicolas Berguerand; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; Interconnected Fluidized Beds; Oxygen Carrier; Chemical-Looping Combustion; Carbon Dioxide Capture; Solid Fuel Conversion;

    Sammanfattning : The use of a 10 kWth chemical-looping combustor for solid fuels was investigated. The unit was designed, dimensioned and built and two types of fuel were tested: a South African coal and a petroleum coke from Mexico. Chemical-looping combustion is an alternative to normal combustion for CO2 capture. LÄS MER

  4. 19. Experimental studies on treatment and recycling of pickling sludge generated in stainless steel production

    Författare :Ping Ma; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Process Metallurgy; Processmetallurgi;

    Sammanfattning : Pickling sludge generated in the stainless steel industries contains large amounts of calcium fluoride and water and relatively small amounts of metals. Therefore, such sludge is difficult to be directly recycled back to the EAF process and would be harmful to the environment if deposited as landfill for a long term. LÄS MER

  5. 20. Multivariable control of a pneumatic conveying system

    Författare :Wolfgang Birk; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Reglerteknik; Control Engineering;

    Sammanfattning : This licentiate thesis deals with a multivariable controller of a pneumatic conveying system. The industrial process used to illustrate design, analysis and implementation of a multivariable controller is the injection of fine coal into a blast furnace. LÄS MER