Sökning: "DIC analysis"

Visar resultat 1 - 5 av 23 avhandlingar innehållade orden DIC analysis.

  1. 1. On the deformation behavior and cracking of ductile iron; effect of microstructure

    Författare :Keivan Amiri Kasvayee; Anders E.W. Jarfors; Jens Bergström; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spherical graphite iron; component casting; high silicon ductile iron; digital image correlation DIC ; in-situ tensile testing; in-situ cyclic testing; DIC pattern generation; pit etching; micro-scale deformation; micro-crack; finite element analysis FEA ; focused ion beam FIB milling; segjärn; komponentgjutning; högkisellegerat segjärn; digital image correlation DIC ; insitu dragprovning; in-situ cyklisk provning; DIC-mönstergenerering; grop-etsning; mikroskalig deformation; mikrosprickor; finite element analys FEA ; fokuserad jonstråle FIB avverkning;

    Sammanfattning : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. LÄS MER

  3. 2. Mechanics of Cross-Laminated Timber

    Författare :Dietrich Buck; Olle Hagman; Dick Sandberg; Mats Ekevad; Mikael Sjödahl; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CLT assembly; CLT manufacture; Crosslam; DIC analysis; Digital speckle photography; Full-field mechanics; Laminated wood product; Mass timber engineering; Non-contact measurement; Non-destructive; Optical measurement; Panel configuration; Strain localization; X-lam; Alternativ byggmetod; Bildkorrelation; Hållbart byggande; KL- trä; Korslimmat trä; Skjuvtöjning; Massivträ; Träkonstruktion; Träteknik; Wood Science and Engineering;

    Sammanfattning : Increasing awareness of sustainable building materials has led to interest in enhancing the structural performance of engineered wood products. Wood is a sustainable, renewable material, and the increasing use of wood in construction contributes to its sustainability. LÄS MER

  4. 3. Wood shrinkage in CT-scanning analysis

    Författare :José Couceiro; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Wood Physics; Träfysik;

    Sammanfattning : Computed tomography (CT) can be used to study wood-water interactions in differentways, such as by determining wood moisture content (MC). The determination of MCrequires two CT images: one at the unknown moisture distribution and a second one ata known reference MC level, usually oven-dry MC. The two scans are then compared. LÄS MER

  5. 4. Microstructure and deformation behaviour of ductile iron under tensile loading

    Författare :Keivan Amiri Kasvayee; Anders E.W. Jarfors; Ehsan Ghassemali; Lennart Elmquist; Kenneth Hamberg; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ductile iron; digital image correlation DIC ; in-situ tensile test; pit etching; Microscale deformation; micro-crack; finite elements analysis FEA ; cohesive elements;

    Sammanfattning : The current thesis focuses on the deformation behaviour and strain distribution in the microstructure of ductile iron during tensile loading. Utilizing Digital Image Correlation (DIC) and in-situ tensile test under optical microscope, a method was developed to measure high resolution strain in microstructural constitutes. LÄS MER

  7. 5. Elastic Press and Die Deformations in Sheet Metal Forming Simulations

    Författare :Johan Pilthammar; Sharon Kao-Walter; Mats Sigvant; Roald Lingbeek; Blekinge Tekniska Högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Sheet Metal Forming; Stamping Die; Stamping Press; Structural Analysis; Finite Element Simulation; Optimization; Digital Image Correlation; Inverse Modeling;

    Sammanfattning : Never before has the car industry been as challenging, interesting, and demanding as it is today. New and advanced techniques are being continuously introduced, which has led to increasing competition in an almost ever-expanding car market. LÄS MER