Sökning: "stress corrosion cracking"

Visar resultat 16 - 20 av 26 avhandlingar innehållade orden stress corrosion cracking.

  1. 16. Residual stress in a T-butt joint weld : cylinder versus plane plate geometry

    Författare :Berth Eriksson; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : The welding process introduces residual stress originating from the heating, melting and cooling of the material. From the point of view of fatigue and stress corrosion cracking, the weld residual stress perpendicular to the weld axis is of particular interest. LÄS MER

  3. 17. 2D hybrid modeling of defects in an ultrasonic inspection situation

    Författare :Maria Semenova; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ultrasonics; T matrix; Finite element method; Scattering; Modelling;

    Sammanfattning : Advanced methods of nondestructive evaluations (NDE) are widely used for in-service inspection in many industrial applications, e.g. nuclear and aerospace industries. In these applications the components are exposed to different degradation mechanisms (e. LÄS MER

  4. 18. On Tool Failure in Die Casting

    Författare :Anders Persson; Sture Hogmark; Jens Bergström; Torsten Eriksson; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; Materialvetenskap; Materials science; Teknisk materialvetenskap; materialvetenskap; Materials Science;

    Sammanfattning : Die casting is a very cost-efficient method of forming thin-walled and complex near net-shaped products with close geometric tolerances and good surface finish. A permanent die tool is used to make large quantities of identical products. The performance and tool life are limited by several mechanisms, e.g. LÄS MER

  5. 19. On failure of high strength steel bridge roller bearings

    Författare :Pourya Noury; Ove Lagerqvist; Kjell Eriksson; John Yates; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Stålbyggnad; Steel Structures;

    Sammanfattning : This thesis is concerned with failure analysis of high strength steel bridge roller bearings.Paper Adescribes how the commonly used Hertz formulas for contact stresses underestimate the actual stresses in practice due to temperature differences, misalignments and other construction-related conditions. LÄS MER

  7. 20. Solid metal induced embrittlement of titanium alloys

    Författare :Pia Åkerfeldt; Melina da Silva; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materialteknik; Engineering Materials;

    Sammanfattning : Titanium alloys were for a time believed to be highly resistant to environmentally assisted cracking because of their ability to form a protective oxide film on the surface. Their resistance can still be considered to be high, but when cracking resistance was originally defined to ensure reliable functionality of fracture-critical components, certain conditions that promote cracking were discovered. LÄS MER