Sökning: "free surface deformation"
Visar resultat 16 - 20 av 50 avhandlingar innehållade orden free surface deformation.
16. Experimental Studies of Deformation Structures in Stainless Steels using EBSD
Sammanfattning : In this thesis, the focus has been the study of deformation structures in stainless steels by using electron backscatter diffraction (EBSD). Via increased knowledge of the evolution of the substructure during deformation, the design and control of the manufacturing process can be improved. LÄS MER
17. Computational Modeling of Liquid-Phase based on Homogenization
Sammanfattning : Liquid-phase sintering is the process where a pre-compacted powder, "green body", is heated to the point where(a part of) the solid material melts, and the specimen shrinks while keeping (almost) net shape. In the case of hardmetal, the microstructure is defined by WC-Co-particles with large pores, whereby molten Co represents the liquid phase. LÄS MER
18. Effect of Stress Relief Annealing: Part Distortion, Mechanical Properties, and Microstructure of Additively Manufactured Austenitic Stainless Steel
Sammanfattning : Additive manufacturing (AM) processes may introduce large residual stresses in the as-built part, in particular the laser powder bed fusion process (L-PBF). The residual stress state is an inherent consequence of the heterogeneous heating and subsequent cooling during the process. LÄS MER
19. Performance Testing of Cutting Fluids and Tool Holders in Metal Cutting
Sammanfattning : ABSTRACTThe metal cutting industry has evolved over the last century to the point where an increasing range and complexity of tool holding systems and cutting fluids are available for metal machining in the market. Most of the companies report their cutting fluid cost to be between 7 -17 % of the manufacturing cost. LÄS MER
20. Microstructure engineering of additively manufactured materials by powder bed fusion-laser beam: Cases for ferritic stainless steels and medium entropy alloys
Sammanfattning : Powder bed fusion laser beam (PBF-LB) is a powder bed fusion additive manufacturing process that is one of the most established and widely used techniques for manufacturing near net shape components. The unique characteristics of PBF-LB, such as the high cooling rates and local directional heat transfer, lead to the formation of unique microstructures. LÄS MER