Sökning: "erosion of material"

Visar resultat 11 - 15 av 113 avhandlingar innehållade orden erosion of material.

  1. 11. Characterization of WC-Co tools used for machining of Alloy 718 under the influence of high-pressure coolant supply

    Författare :Philipp Hoier; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; erosion; surface-modifications; High-pressure coolant supply; Alloy 718; tool wear; vapor-barrier;

    Sammanfattning : The use of high-pressure jets for supply of coolant to the cutting zone has the potential to significantly increase the productivity and process stability when machining difficult-to-cut materials such as Ni-based superalloys. Apart from better chip-breakability, the jets enable the coolant to reach closer to the cutting edge and hence enhance its capability to dissipate heat. LÄS MER

  3. 12. Cavitation Erosion Mechanisms in Cast Irons

    Författare :Marcio Freitas de Abreu; Stefan Jonsson; Jessica Elfsberg; Matevz Dular; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Teknisk materialvetenskap; Materials Science and Engineering;

    Sammanfattning : The research presented in this thesis investigated the mechanisms by which cavitation erosion damage develops in lamellar graphite iron (LGI) and austempered ductile irons (ADIs). This has been achieved by image sequences of surface erosion on test samples in tandem with weight change measurements. LÄS MER

  4. 13. Stability of tailings dams : focus on numerical modelling

    Författare :Muhammad Auchar Zardari; Anders Sellgren; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Soil Mechanics; Geoteknik;

    Sammanfattning : Upstream tailings dams may experience slope stability problems when the rate of raising is too fast. Tailings consolidate slowly due to low hydraulic conductivity. The excess pore pressures can build up due to accelerated rate of raising. LÄS MER

  5. 14. Predicting surfacing internal erosion in moraine core dams

    Författare :Hans Rönnqvist; Anders Wörman; Hans Bergh; Kaare Høeg; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; internal erosion; internal stability; filters; moraine core; embankment dams; sinkholes; internal erosion assessment; Geoengineering and mining engineering; Geoteknik och gruvteknik;

    Sammanfattning : Dams that comprise broadly and widely graded glacial materials, such as moraines, have been found to be susceptible to internal erosion, perhaps more than dams of other soil types. Internal erosion washes out fine-grained particles from the filling material; the erosion occurs within the material itself or at an interface to another dam zone, depending on the mode of initiation. LÄS MER

  7. 15. Silicone Rubber Insulators: Impacts of Material Formulation in Coastal Environment

    Författare :Tomas G Gustavsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; surface characterization; aging; filler level; outdoor insulation; leakage current measurements; material formulation; silicone rubber; polymeric insulators; coastal environment; polydimethylsiloxane PDMS ;

    Sammanfattning : This thesis deals with influences of material formulation on the performance of silicone rubber high voltage insulators in a coastal environment. Samples and insulators with known differences in material compositions have been used in this task. In the first step, a screening test with cylindrical samples was initiated. LÄS MER