Avancerad sökning

Visar resultat 16 - 20 av 45 avhandlingar som matchar ovanstående sökkriterier.

1. 16. Investigations of the Kinetics of Reduction and Reduction/Carburization of NiO-WO3 Precursors

   Författare :Hesham M. Ahmed; Seshadri Seetharaman; Ricardo Morales Estrella; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Reduction; Reduction-Carburization; Gas-solid Reactions; Kinetics; Hydrogen; Methane; Thermogravimetric analysis; Fluidized bed; Simulation; Thermal diffusivity; Thermal conductivity; Laser flash; Metallurgical process engineering; Metallurgisk processteknik; Process Metallurgy;

   Sammanfattning : Kinetic studies of reduction of the mixtures of NiO and WO3 having different Ni/(Ni+W) molar ratios in flowing hydrogen gas were investigated by means of Thermo Gravimetric Analysis (TGA), Fluidized Bed (FB) technique as well as Thermal diffusivity measurements under isothermal conditions. In the case of TGA, the reaction progress was monitored by mass loss, while evolved gas analysis by a gas chromatograph was the indicator of the reaction progress in the case of FB. LÄS MER

3. 17. Spherical Crystallization of Benzoic Acid

   Författare :Jyothi Thati; Åke Rasmuson; Luis Moreno; Eva Blomberg; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spherical agglomeration; Spherical agglomeration; Benzoic acid; Solubility phase diagram; Physico mechanical properties; Chemical engineering; Kemiteknik;

   Sammanfattning : Spherical agglomerates of benzoic acid crystals have been successfully prepared by drowning-out crystallization in three solvent partial miscible mixtures. Benzoic acid is dissolved in ethanol, bridging liquid is added and this mixture is fed to the agitated crystallizer containing water. LÄS MER

4. 18. Pyrolysis of biomass in fluidized-beds: in-situ formation of products and their applications for ironmaking

   Författare :Pelle Mellin; Weihong Yang; Blasiak Wlodzimierz; Gerrit Brem; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Biomass; Pyrolysis; Fluidized bed; CFD; Blast furnace; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : The iron and steel industry emitted 8 % of all CO2 emissions in Sweden, 2011. Investigating alternative energy carriers is the purpose of this thesis. By pyrolyzing biomass, an energetic solid, gaseous and liquid (bio oil) fraction is obtained. LÄS MER

5. 19. Layer formation on quartz particles during fluidized bed combustion/gasification of woody biomass

   Författare :Hanbing He; Christoffer Boman; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Energy Engineering; Energiteknik;

   Sammanfattning : The formation of sticky layers on bed particles has been considered as a prerequisite for bed agglomeration in fluidized bed combustion and gasification of woody fuels. In addition, the layer formed makes the bed particle less resistant against fragmentation. The fragments from quartz particles can result in deposition. LÄS MER

7. 20. Measurement and Control of Metal Vapours during Fluidized Bed Combustion of Biomass Fuels

   Författare :Khanh-Quang Tran; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; SI detector; metal capture; sorbent; Aalkali capture; TQ impactor; GQ probe;

   Sammanfattning : Increased combustion of biomass fuels for heat and power production has created a need to recycle nutrient elements in biomass ash to soils to make the biomass consumption sustainable. It is, however, difficult to recycle the total amount of biomass ash produced due to the high concentrations of heavy metals and their readily soluble forms in some ash fractions. LÄS MER