Sökning: "corrosion steel"

Visar resultat 16 - 20 av 210 avhandlingar innehållade orden corrosion steel.

1. 16. High temperature corrosion during waste incineration : characterisation, causes and prevention of chlorine-induced corrosion

   Författare :Peter Viklund; Christofer Leygraf; Jan Froitzheim; Staffan Hertzman; Sweden Stockholm Swerea KIMAB AB; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; high temperature corrosion; waste incineration; superheater tubing; steel; alkali; chlorine; suphur; Chemistry; Kemi;

   Sammanfattning : Waste-fired boilers suffer severely from corrosion of critical components such as superheater tubes. In this work the high temperature corrosion of candidate superheater alloys have been investigated by detailed laboratory studies and controlled field exposures in full-scale boilers. LÄS MER

3. 17. Localised corrosion and atmospheric corrosion of stainless steels

   Författare :Sukanya Hägg Mameng; Rachel Pettersson; Christopher Leygraf; Thomas Ladwein; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; stainless steel; localised corrosion; atmospheric corrosion; alloy composition; surface finish; surface roughness; surface treatment; surface orientation; contamination; chloride; sulphate; temperature; chlorination; exposure conditions.; Kemi; Chemistry;

   Sammanfattning : This research is focused on defining limiting conditions for corrosion of stainless steels. The aim of the first part (Papers I-IV) was to understand the role of alloying level and environmental parameters on localised corrosion in aqueous conditions. LÄS MER

4. 18. Corrosion testing of heat exchanger tubing

   Författare :Ulf Kivisäkk; KTH; []
   Nyckelord :corrosion testing; heat exchanger; stainless steels; general corrosion; immersion testing; activation; stress corrosion cracking; constant load; u-bends; relaxation; dewpoint corrosion;

   Sammanfattning : Heat exchanger tubes are commonly made from stainless steel.In a heat exchanger both the process fluid and the cooling orheating media can be corrosive. It is therefore important to beable to select materials that do not suffer from corrosion.Current methods in this area, however, suffer from limitationsand shortcomings. LÄS MER

5. 19. Superheater corrosion in biomass and waste fired boilers : Characterisation, causes and prevention of chlorine-induced corrosion

   Författare :Peter Viklund; Christofer Leygraf; John Nicholls; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; high temperature corrosion; waste; biomass; superheater tubes; steel; alkali; chlorine; sulphur;

   Sammanfattning : Biomass and waste fired boilers suffer severely from corrosion of critical components such as superheater tubes. In this work high temperature corrosion of superheater alloys, and methods to mitigate the problem, have been investigated by laboratory studies and controlled field exposures in commercial boilers. LÄS MER

7. 20. Corrosion of ferritic stainless steels used in solid oxide fuel cells - Investigation of novel coatings in single- and dual-atmosphere conditions

   Författare :Matthieu Tomas; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Copper; Interconnect; Coatings; Alumina; Dual Atmosphere; Area-Specific Resistance; SOFC; Corrosion;

   Sammanfattning : Solid Oxide Fuel Cells (SOFCs) are systems that convert chemical energy into electrical energy. Their high electrical efficiency and clean emissions (when H2 is used as fuel) make them a strong candidate for replacing conventional conversion systems, such as combustion engines. LÄS MER