Sökning: "corrosion steel"

Visar resultat 11 - 15 av 210 avhandlingar innehållade orden corrosion steel.

1. 11. Process-microstructure-corrosion interrelations for stainless steel

   Författare :David Lindell; Rachel Pettersson; Rebecca L. Higginson; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; stainless steel; processing; annealing; pickling; microstructure; corrosion; anisotropy; oxyfuel; Kemi; Chemistry;

   Sammanfattning : Stainless steels were first developed in the early 20th century and have since then emerged as a very diverse class of engineering materials. Along with steels having new combinations of properties, there is a continuous development of new technologies allowing the material to be produced in a faster and more energy effcient manner. LÄS MER

3. 12. Studies of surface treatments of stainless steel for improved corrosion resistance

   Författare :Daniel Wallinder; KTH; []
   Nyckelord :stainless steel; iron; chromium; passivity; passive film; pickling; polishing; passivation; bright-annealing; XPS; SIMS; EIS; potentiostatic polarization; potentiodynamic polarization; aqueous corrosion; localized corrosion; atmospheric corrosion; hi;

   Sammanfattning : .... LÄS MER

4. 13. Corrosion of steel bars in fibre reinforced concrete: corrosion mechanisms and structural performance

   Författare :Carlos Gil Berrocal; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; residual flexural capacity; chloride-induced corrosion; electrical resistivity; Fibre reinforced concrete; reinforcement bond; durability; cracking;

   Sammanfattning : The viability of employing fibre reinforcement to improve the durability performance of RC structures by delaying and/or reducing rebar corrosion and by mitigating the structural impact of corrosion-induced damage have been investigated. Given the enhanced crack control of FRC, it could be advantageous to use fibres in civil engineering structures to decrease the ingress of corrosion-initiation substances. LÄS MER

5. 14. Influence of hydrogen on corrosion and stress induced cracking of stainless steel

   Författare :Ulf Kivisäkk; Christofer Leygraf; Roy Johnsen; KTH; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; hydrogen; corrosion; hydrogen embrittlement; stainless steels; uniform corrosion; activation; dewpoint corrosion; low temperature creep; plastic deformation; microhardness; Surface and colloid chemistry; Yt- och kolloidkemi;

   Sammanfattning : Hydrogen is the smallest element in the periodical table. It has been shown in several studies that hydrogen has a large influence on the corrosion and cracking behaviour of stainless steels. Hydrogen is involved in several of the most common cathode reactions during corrosion and can also cause embrittlement in many stainless steels. LÄS MER

7. 15. Nanocomposite films for corrosion protection

   Författare :Majid Sababi; Jinshan Pan; J.M.C. (Arjan) Mol; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; corrosion protection; nanocomposite; coating; tool alloy; layer‐by‐layer; polarization; passivity; nanomechanical; topography; Mefp‐ 1; ceria nanoparticle; PAni; UV‐cure; AFM; Peak Force QNM; EIS; SEM; CRM; QCM‐D; ATR‐FTIR;

   Sammanfattning : This thesis describes technical and scientific aspects of new types of composite films/coatings for corrosion protection of carbon steel, composite films with nanometer thickness consisting of mussel adhesive protein (Mefp‐1) and ceria nanoparticles, and polymeric composite coatings with micrometre thickness consisting of conducting polymer and ceria nanoparticles in a UV‐curing polyester acrylate (PEA) resin.The influence of microstructure on corrosion behaviour was studied for a Fe‐Cr‐V‐N alloy containing micro‐sized nitrides with different chemical composition spread in martensitic alloy matrix. LÄS MER