Sökning: "Underground mining"

Visar resultat 36 - 40 av 70 avhandlingar innehållade orden Underground mining.

1. 36. Drill process monitoring in percussive drilling for location of structural features, lithological boundaries and rock properties, and for drill productivity evaluation

   Författare :Håkan Schunnesson; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mining and Rock Engineering; Gruv- och Berganläggningsteknik;

   Sammanfattning : This thesis deals with the application of percussive drill monitoring in the mining and underground construction industries. The technique has been used to provide information on different ground properties and conditions and for drill productivity evaluation. LÄS MER

3. 37. Listening to the story of the rock mass : The integration of conventional and unconventional data to understand rock mass behaviour at the Kiirunavaara Mine

   Författare :Jessica Vatcher; Stephen D McKinnon; Jonny Sjöberg; Dick Stacey; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mining and Rock Engineering; Gruv- och Berganläggningsteknik;

   Sammanfattning : The need to understand rock mass behaviour has never been greater; as mining globally progresses deeper to extract the precious resources humankind needs to maintain and forward our lives, we encounter rock behaviours associated with deep mining. These environments typically experience seismicity (including fault slip), rock bursting, strain bursting, spalling, aseismic movement along pre-existing discontinuities, and ground falls. LÄS MER

4. 38. Deformation and failure of rock

   Författare :Kelvis del Carmen Pérez Hidalgo; Håkan Stille; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mining and Rock Engineering; Gruv- och berganläggningsteknik;

   Sammanfattning : In this doctoral thesis work the relationship between the deformation and the initiation of failure around an underground excavation was studied. In this work data from observed failure and measured deformations was used. This work is based on information obtained from laboratory test, underground field cases and numerical analysis. LÄS MER

5. 39. Draw control strategy for sublevel caving mines : A probabilistic approach

   Författare :Gurmeet Shekhar; Håkan Schunnesson; Anna Gustafson; Jesper Martinsson; Matthias Wimmer; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Draw control; sublevel caving; probability models; Mining and Rock Engineering; Gruv- och berganläggningsteknik;

   Sammanfattning : Sublevel caving is an underground mass mining method used for extracting different types of ores from the earth crust. Mines using sublevel caving (SLC) as the primary mining method are generally highly mechanized with standardized and independent unit operations. LÄS MER

7. 40. Strength, fallouts and numerical modelling of hard rock masses

   Författare :Catrin Edelbro; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mining and Rock Engineering; Gruv- och berganläggningsteknik;

   Sammanfattning : The prediction of compressive stress-induced failures is of concern for the design and construction of deep underground excavations in mining and civil engineering. An overstressed rock mass may result in fallouts of rock, which may cause occupational safety hazards, damage of equipment, and/or production disturbances. LÄS MER