Sökning: "tuned"

Visar resultat 1 - 5 av 435 avhandlingar innehållade ordet tuned.

1. 1. Development of Accurate Reduced Order Models in a Simulation Tool for Turbomachinery Aeromechanical Phenomena

   Författare :Mauricio Gutierrez Salas; Björn Laumert; Paul Petrie-Repar; Damian Vogt; Carlos Martel; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; flutter; forced response; high cycle fatigue; reduced order models; ROM; craig-bampton; mistuning; tuned; mistuned; cyclic; noncyclic; craig-chang; free-interface. fixed-interface; subset nominal mode; SNM; CBMS; CCMS; CCC; CBC; FEM; CMS; modal; eigen; modeshapes; aeroelasticity; aeromechanical; tool; turbomachinery; turbine; compressor; AROMA; Energy Technology; Energiteknik;

   Sammanfattning : Modern gas turbines are still vulnerable to vibrations when operated at certain speeds. This unstable environment can lead to high cycle fatigue (HCF) and damage several of the components inside the turbine. LÄS MER

3. 2. Attenuation of hand-held machine vibrations. Application of non-linear tuned vibration absorber

   Författare :Hans Lindell; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Impact machine; Hand-arm vibration; High frequency vibration; ATVA; Nonlinear tuned vibration absorber; White finger; HAVS; Transient vibration; Auto Tuned Vibration Absorber; Vibration dynamics; ISO 5349;

   Sammanfattning : Vibration injury in the hand-arm system from vibrating hand-held machines is one of the most common occupational health injuries and causes severe and often chronic nerve and vascular injuries to the operator. The objective with this study is to contribute to reduce hand-arm vibration injuries, first by developing methods of redesigning machines that will lower their vibration level and second to study how high frequency vibrations (HFV) above 1250 Hz effect the finger tissue which are not included in the current standard for risk evaluation. LÄS MER

4. 3. Fault detection in lambda-tuned control loops

   Författare :Magnus Berndtsson; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Reglerteknik; Control Engineering;

   Sammanfattning : Poorly operating control loops cause loss in productivity in almost every industry worldwide. Therefore performance monitoring has been an active area of research for the past decades. In this work, a newly developed fault detection method is applied to the monitoring of lambda-tuned control loops. LÄS MER

5. 4. Diagnostic Accuracy of Tuned Aperture Computed Tomography (TACT®)

   Författare :Madhu K. Nair; Göteborgs universitet; []
   Nyckelord :MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES;

   Sammanfattning : The diagnostic accuracy of Tuned Aperture Computed Tomography (TACT) was evaluated for a variety of diagnostic tasks. Drawbacks of 2D radiography, lack of accessibility and high cost associated with advanced imaging modalities prompted these studies. LÄS MER

7. 5. galactmannan degradation by fungi and gut bacteria : structural enzymology and fine -tuned substrate specifcity

   Författare :Sumitha Krishnaswamyreddy; Biokemi och Strukturbiologi; []
   Nyckelord :fine-tuned substrate specificity; β-mannanase; β-mannosidases; synergy; α-galactosidases; mannan converison in gut; transglycosylation; polysaccharide utilisation locus; phylogenetic analysis; MALDI-TOF MS;

   Sammanfattning : AbstractThe degradation of plant based β-mannan polysaccharides represents one of the many challenges efficiently tackled by microorganisms living in different habitats. In this thesis, glycoside hydrolases (GHs) involved in mannan degradation from two different organisms, Aspergillus nidulans (paper I and II) and Bacteroides ovatus (paper III and IV) were studied. LÄS MER