Sökning: "reduced order models"

Visar resultat 1 - 5 av 367 avhandlingar innehållade orden reduced order models.

1. 1. Development of Accurate Reduced Order Models in a Simulation Tool for Turbomachinery Aeromechanical Phenomena

   Författare :Mauricio Gutierrez Salas; Björn Laumert; Paul Petrie-Repar; Damian Vogt; Carlos Martel; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; flutter; forced response; high cycle fatigue; reduced order models; ROM; craig-bampton; mistuning; tuned; mistuned; cyclic; noncyclic; craig-chang; free-interface. fixed-interface; subset nominal mode; SNM; CBMS; CCMS; CCC; CBC; FEM; CMS; modal; eigen; modeshapes; aeroelasticity; aeromechanical; tool; turbomachinery; turbine; compressor; AROMA; Energy Technology; Energiteknik;

   Sammanfattning : Modern gas turbines are still vulnerable to vibrations when operated at certain speeds. This unstable environment can lead to high cycle fatigue (HCF) and damage several of the components inside the turbine. LÄS MER

3. 2. Reduced Order Modeling and Substructuring : Applications in Nonlinear Structural Dynamics

   Författare :Linus Andersson; Byggnadsmekanik; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Reduced order modeling; Substructuring; Nonlinear dynamics; Geometrically nonlinear; Modal derivatives; Blast loading; Soft-body impact; Glass structures;

   Sammanfattning : A structural design process typically involves various load cases for which a sufficient load-bearing capacity must be demonstrated. In addition to static load cases, a verification of dynamic loads, such as blast and impact loading, may be required. LÄS MER

4. 3. CFD Simulations for Film Cooling : Reduced Models at Engine Like Conditions

   Författare :Andreas Bradley; Matts Karlsson; Karl Storck; Linköpings universitet; []
   Nyckelord :;

   Sammanfattning : In gas turbines some parts are exposed to combustion gases with temperatures well above the melting temperature of the material. Therefore, various cooling techniques are utilized in order to protect the parts exposed to these hot gases. One such technique, film cooling, is a common and well established way to protect the exposed parts. LÄS MER

5. 4. Predicting Xenon Oscillations in PWRs using Intrusive Reduced Order Modelling

   Författare :Kristoffer Pedersen; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Reduced Order Modeling; Modal Decomposition; Multi-Group Diffusion Theory; Xenon Oscillations;

   Sammanfattning : The increasing presence of intermittent energy sources in the Swedish electricity grid necessitates a transition of Swedish nuclear reactors from constant base load operation to load-following mode. However, such changes in power can induce xenon oscillations, a phenomenon that poses operational challenges and the risk of fuel damage. LÄS MER

7. 5. Unsteady Numerical Simulations and Reduced-Order Modelling of Flows around Vehicles

   Författare :Jan Östh; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Reduced-Order Modelling; Numerical Simulations; Large Eddy Simulation; Vehicle Aerodynamics;

   Sammanfattning : In this thesis several simulations have been carried out aimed at improving the knowledge of vehicle aerodynamics and improving the flow around vehicles with respect to theaerodynamic drag. Five flows around different simplified vehicle models have been considered in five appended publications. LÄS MER