Sökning: "craig-bampton"

Hittade 3 avhandlingar innehållade ordet craig-bampton.

  1. 1. Development of Accurate Reduced Order Models in a Simulation Tool for Turbomachinery Aeromechanical Phenomena

    Författare :Mauricio Gutierrez Salas; Björn Laumert; Paul Petrie-Repar; Damian Vogt; Carlos Martel; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; flutter; forced response; high cycle fatigue; reduced order models; ROM; craig-bampton; mistuning; tuned; mistuned; cyclic; noncyclic; craig-chang; free-interface. fixed-interface; subset nominal mode; SNM; CBMS; CCMS; CCC; CBC; FEM; CMS; modal; eigen; modeshapes; aeroelasticity; aeromechanical; tool; turbomachinery; turbine; compressor; AROMA; Energy Technology; Energiteknik;

    Sammanfattning : Modern gas turbines are still vulnerable to vibrations when operated at certain speeds. This unstable environment can lead to high cycle fatigue (HCF) and damage several of the components inside the turbine. LÄS MER

  3. 2. Vehicle Disc Brake Roughness Noise : Experimental Study of the Interior Noise andVibro-Acoustic Modelling of Suspension Systems

    Författare :Eskil Lindberg; Nils-Erik Hörlin; Peter Göransson; Wolfgang Kropp; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; acoustics; disc brake; surface topography; wire brush noise; roughness noise; component mode synthesis; vehicle suspension;

    Sammanfattning : Prediction of vehicle disc brake roughness noise is a non-trivial challenge. In fact, neither the source mechanisms, nor the transfer paths are so far well understood. LÄS MER

  4. 3. Vibrations in lightweight structures - Efficiency and reduction of numerical models

    Författare :Ola Flodén; Byggnadsmekanik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : Multi-storey wood buildings have been increasing in popularity since a century-old ban on the construction of such buildings was lifted in 1994. Compared to conventional concrete structures, it is more difficult to build lightweight structures in such a way that noise and disturbing vibrations is avoided. LÄS MER