Avancerad sökning
Visar resultat 1 - 5 av 50 avhandlingar som matchar ovanstående sökkriterier.
1. Experimental and computational investigation of the roll forming process
Sammanfattning : One of the first questions to consider when designing a new roll forming line is the number of forming steps required to produce a profile. The number depends on material properties, the cross-section geometry and tolerance requirements, but the tool designer also wants to minimize the number of forming steps in order to reduce the investment costs for the customer. LÄS MER
2. On the Fluid Mechanics of Partial Dewatering during Roll Forming in Paper Making
Sammanfattning : The present work deals with some aspects of the fluidmechanics of paper-making,more specifically partial dewateringduring roll forming. The study is mainly experimental. Pressureand wire position measurements have been carried out in anexperimental facility, the KTH-Former,which models the rollforming zone of a paper machine. LÄS MER
3. Fibre flocculation during twin-wire roll forming
Sammanfattning : At the division of Paper Technology a forming unitconsisting of headbox, forming roll unit and reservoir systemfor suspension recirculation has been constructed, with themain purpose to experimentally study the paper forming event byvisually following the fibre flow phenomena in the formingzone.The effect of various running parameters upon the pressuredistribution, which is in correlation to the flow phenomenaoccuring during forming, has been studied with a flush mountedpressure sensor. LÄS MER
4. Modelling and simulation of the roll forming process
Sammanfattning : One of the first decisions to make when a new roll forming line is designed is the number of forming steps needed to produce a profile. This is dependent on the material properties, the cross-section geometry and the tolerance requirements. LÄS MER
5. Modeling of Cold Pilgering of Tubes
Sammanfattning : Cold pilgering is a challenging tube forming process in terms of modeling due to the complexity in kinematic of tools, friction condition and material behavior. The process development has mostly been based on simple formulas and costly full-scale tryouts. LÄS MER